W25X05CLUXIG

Las imágenes son solo para referencia

W25X05CLUXIG

  • Fabricante
  • Mfr. Parte #W25X05CLUXIG
  • Paquete
  • Hoja de datos
  • En stock3736

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

EU RoHS Compliant
ECCN (US) EAR99
Part Status Active
HTS 8542.32.00.71
Automotive No
PPAP No
Cell Type NOR
Chip Density (bit) 512K
Architecture Sectored
Boot Block Yes
Block Organization Symmetrical
Location of Boot Block Bottom|Top
Address Bus Width (bit) 24
Sector Size 4Kbyte x 16
Page Size 256byte
Number of Bits/Word (bit) 8
Number of Words 64K
Programmability Yes
Timing Type Synchronous
Max. Access Time (ns) 8
Maximum Erase Time (S) 2/Chip
Maximum Programming Time (ms) 0.8/Page
Interface Type Serial (SPI, Dual SPI)
Minimum Operating Supply Voltage (V) 2.3
Typical Operating Supply Voltage (V) 2.5|3.3
Maximum Operating Supply Voltage (V) 3.6
Programming Voltage (V) 2.3 to 3.6
Operating Current (mA) 14
Program Current (mA) 12
Minimum Operating Temperature (°C) -40
Maximum Operating Temperature (°C) 85
Supplier Temperature Grade Industrial
Command Compatible Yes
ECC Support No
Support of Page Mode No
Mounting Surface Mount
Package Height 0.53 mm
Package Width 3 mm
Package Length 2 mm
PCB changed 8
Standard Package Name SON
Supplier Package USON
Pin Count 8

Descripción general

Description

The W25X05CLUXIG is a serial NOR Flash memory chip manufactured by Winbond. It features a storage capacity of 512 Kbits (64 Kbytes) and operates using the SPI (Serial Peripheral Interface) protocol, which allows for high-speed data transfer. The chip is designed for applications requiring non-volatile storage, such as embedded systems, consumer electronics, and IoT devices.
Key features include a wide operating voltage range (2.7V to 3.6V), fast read speeds (up to 104 MHz), and multiple programming modes. Its compact 8-pin SOP or 8-pin WSON packages make it suitable for space-constrained designs. The device also supports page programming and sector erase operations, enhancing its versatility in data management.
The W25X05CLUXIG is ideal for applications that demand reliability, efficiency, and a small footprint, such as firmware storage, configuration settings, and data logging. Its low power consumption during operation and deep power-down modes make it a robust choice for battery-operated devices.

Features

The W25X05CLUXIG is a 5 Mbit (512K x 8) Serial Flash Memory device from Winbond. Key features include:
1. Interface: Utilizes an SPI (Serial Peripheral Interface) for high-speed communication.
2. Operating Voltage: Supports a voltage range of 2.7V to 3.6V, making it suitable for various applications.
3. Memory Organization: Offers a 512K x 8-bit architecture with a page size of 256 bytes.
4. Speed: Capable of operating at clock speeds up to 104 MHz, enhancing data transfer rates.
5. Read and Write Operations: Supports fast read, program (write), and erase capabilities, including sector and chip erase.
6. Low Power Consumption: Designed for low power use, ideal for battery-operated devices.
7. Endurance and Retention: Provides a minimum of 100,000 program/erase cycles and data retention of up to 20 years.
8. Packages: Available in various packages, including SOP-8 and WSON-8, allowing flexibility in design.
This versatility makes it suitable for applications in consumer electronics, automotive, and industrial sectors.

Package

The W25X05CLUXIG is a serial NOR flash memory chip packaged in an 8-pin SOIC (Small Outline Integrated Circuit) package. It is designed for surface mounting and features a compact form factor suitable for various electronic applications.

Pinout

The W25X05CLUXIG is a serial NOR Flash memory device with a pin count of 8. It features a range of functions, including:
1. Data Storage: It provides 5 Mbit (640 KB) of non-volatile memory for data storage.
2. SPI Interface: It uses a Serial Peripheral Interface (SPI) for communication, allowing for fast data transfer rates.
3. Read/Write Operations: Supports standard read, page program, and sector erase operations.
4. Low Power Consumption: Designed for low power operation, making it suitable for battery-powered applications.
5. Hardware and Software Protection: Provides options for write protection to safeguard data.
The device is commonly used in various applications, including embedded systems, consumer electronics, and automotive.

Manufacturer

The W25X05CLUXIG is manufactured by Winbond Electronics Corporation, a company based in Taiwan. Winbond specializes in the design and production of memory products, including various types of DRAM, SRAM, and Flash memory. The company is known for its innovative solutions in the semiconductor industry, catering to markets such as consumer electronics, industrial applications, and automotive technology. They focus on providing high-quality, cost-effective memory products for a wide range of applications, including embedded systems and IoT devices.

Application

The W25X05CLUXIG is a 5V serial NOR Flash memory chip commonly used in embedded systems. Its application areas include firmware storage in microcontrollers, data logging, boot code storage, and code shadowing in consumer electronics, automotive systems, and industrial automation. Its low power consumption and fast access times make it suitable for various applications requiring non-volatile memory.

Equivalent

The W25X05CLUXIG is a serial NOR Flash memory chip with 5 Mbit storage. Equivalent products include:
1. Winbond W25Q05 - Similar specifications but with a different interface.
2. Microchip SST25VF040B - 4 Mbit, SPI interface.
3. STMicroelectronics M25P05 - 5 Mbit, SPI Flash memory.
4. Macronix MX25L2005 - 5 Mbit, SPI Flash memory.
Always verify specific requirements like voltage, speed, and package compatibility before substitution.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar