W25R512JVEIN

Las imágenes son solo para referencia

W25R512JVEIN

IC FLASH 512MBIT SPI 8WSON

  • Fabricante
  • Mfr. Parte #W25R512JVEIN
  • Paquete
  • Hoja de datos
  • En stock22922

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
Base Product Number W25R512
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 512Mbit
Memory Organization 64M x 8
Memory Interface SPI
Clock Frequency 133 MHz
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package 8-WDFN Exposed Pad
Supplier Device Package 8-WSON (8x6)
Packaging Tube

Descripción general

Description

W25R512JVEIN is Winbond’s 512‑Mbit serial NOR flash memory. It provides non-volatile firmware and data storage for embedded systems with a small pin count interface.
Key points
- Capacity: 512 Mbit (64 MBytes) of flash.
- Interface: SPI‑compatible; supports standard SPI and Dual/Quad I/O modes for higher throughput.
- Memory organization: supports fast read with dummy cycles; sector/block erases (4 KB/8 KB sectors, 64 KB and 256 KB blocks) and full‑chip erase.
- Commands and features: JEDEC standard command set; status register read/write; write protection (WP#); hold and reset; power‑down/deep power‑down modes.
- Reliability: typical endurance around 100k P/E cycles; data retention on the order of years (typical values in datasheets).
- Packaging: 8‑pin package (suffix VEIN indicates the specific package variant).
- Applications: firmware storage, boot ROM, and data storage in microcontroller/SoC systems requiring low pin count and reliable, non‑volatile memory.

Features

W25R512JVEIN is a 512‑Mbit serial NOR flash from Winbond. Key features:
- Density: 512 Mbit (64 MB) total
- Interface: Serial SPI with support for standard SPI, Dual I/O, Quad I/O, and QPI modes
- Supply: 2.7–3.6 V operation (typical 3.0 V systems)
- Organization: 256-byte pages
- Erase/_program: 4 KB sectors; 32 KB and 64 KB blocks; page programable (256 bytes per write)
- Read speed: high‑speed reads up to ~104 MHz (with appropriate dummy cycles for modes)
- Power: Deep power-down mode and low active/standby currents
- Security: block protection, write protection, and security features via protection registers
- Reliability: data retention commonly ~years; erase/program endurance on the order of 100k cycles per block (typical)
- Temperature: industrial grade operating range (-40 to 85 °C)
- Package: 8-pin package (JEDEC standard form factor)
Applications: firmware/boot code storage, embedded analytics, and data logging where dense, low‑voltage, high‑speed memory is needed.

Package

8-pin SOP (SOIC) package; RoHS-compliant.

Pinout

Pin count: 8 pins (8-pin SOIC).
Function: Winbond W25R512JVEIN is a serial SPI flash memory. Pin functions (typical): CS# (chip select), SCLK (clock), DI (MOSI), DO (MISO), WP# (write protect), HOLD# (hold), VCC, GND.

Manufacturer

- Manufacturer: Winbond Electronics Corporation.
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory ICs (such as NOR Flash and DRAM) for embedded systems, consumer electronics, and automotive applications.

Application

- External flash memory for embedded systems
- Boot memory and program storage for microcontrollers and SoCs
- Firmware updates and secure boot in automotive, industrial, networking equipment
- Execute-in-place (XIP) of application code
- Data logging and configuration storage in IoT, sensors, meters, wearables
- Storage for FPGA/SoC bitstreams and peripheral firmware; high-speed replacement for serial EEPROM in consumer electronics

Equivalent

Equivalent 512‑Mbit SPI flash parts from other vendors:
- Macronix MX25R512F
- Micron N25Q512A
- Gigadevice GD25Q512
- Spansion S25FL512S
- ISSI IS25LP512F
Note: check voltage and interface (SPI/QPI) and package to ensure full compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar