W25Q64FVSFIG

Las imágenes son solo para referencia

W25Q64FVSFIG

IC FLASH 64MBIT SPI/QUAD 16SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series SpiFlash®
Part Status Obsolete
Base Product Number W25Q64
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O, QPI
Clock Frequency 104 MHz
Write Cycle Time - Word, Page 50µs, 3ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOIC
Packaging Tube

Descripción general

Description

The W25Q64FVSFIG is a 64 Mbit (8 MB) Serial NOR Flash memory from Winbond. It uses a standard SPI (Serial Peripheral Interface) protocol, enabling easy integration with microcontrollers and other devices. Key features include:
1. Memory Organization: It is organized as 8,192 sectors of 256 bytes each, with additional support for 4K and 32K erase sizes.
2. Speed: The device supports high-speed read operations, with a maximum clock frequency of up to 104 MHz in Quad-SPI mode, allowing for fast data retrieval.
3. Endurance and Retention: It typically offers 100,000 program/erase cycles and data retention of 20 years at 85°C.
4. Low Power Consumption: The device is designed for low power operation, making it suitable for battery-operated applications.
5. Applications: Commonly used in consumer electronics, automotive, industrial applications, and IoT devices for firmware storage, configuration settings, and data logging.
Overall, the W25Q64FVSFIG is a versatile and efficient solution for embedded memory needs.

Features

The W25Q64FVSFIG is a 64 Mbit (8 MB) serial NOR flash memory from Winbond. Key features include:
1. Interface: Supports SPI (Serial Peripheral Interface) with dual and quad I/O for faster data transfer.
2. Speed: Offers high-speed read capabilities, with clock rates up to 104 MHz (in Quad I/O mode).
3. Density: Provides a memory density of 64 Mbit, suitable for a variety of applications.
4. Voltage Range: Operates within a voltage range of 2.7V to 3.6V, making it suitable for low-power applications.
5. Endurance: Supports up to 100,000 program/erase cycles per sector.
6. Data Retention: Ensures data retention of up to 20 years at 85°C.
7. Packages: Available in multiple package options, including 8-pin SOIC and 16-pin WSON.
8. Command Set: Compatible with standard and extended command sets for flexibility.
These features make the W25Q64FVSFIG suitable for embedded systems, consumer electronics, and IoT devices.

Package

The W25Q64FVSFIG is packaged in a 8-pin FLGA (Fine Pitch Land Grid Array) package. This type of packaging allows for a compact design and efficient thermal management, suitable for surface-mounted applications.

Pinout

The W25Q64FVSFIG is a 64Mb (8MB) Serial Flash memory device from Winbond. It features a total of 8 pins. The pin configuration and their functions are as follows:
1. VCC: Power supply (+2.7V to +3.6V).
2. GND: Ground reference.
3. SO: Serial Data Output (Data from the memory).
4. SI: Serial Data Input (Data to the memory).
5. SCK: Serial Clock Input (Clock signal for synchronous communication).
6. CS#: Chip Select (Active low signal to select the chip).
7. WP#: Write Protect (Active low signal to enable write protection).
8. HOLD#: Hold (Active low signal to pause communication).
This device supports various modes of operation, including Quad SPI, and is commonly used for code storage and data logging applications in embedded systems.

Manufacturer

The W25Q64FVSFIG is manufactured by Winbond Electronics Corporation. Winbond is a semiconductor company based in Taiwan, primarily known for producing memory solutions, including NOR Flash memory, DRAM, and specialty DRAM products. Established in 1987, Winbond focuses on providing high-performance memory products for various applications, including consumer electronics, automotive, and industrial markets. The company is recognized for its innovation in memory technology and has a broad portfolio of products designed to meet the needs of different sectors.

Application

The W25Q64FVSFIG is a 64 Mb Serial Flash memory chip used in various applications such as consumer electronics, automotive, industrial control, and IoT devices. It serves for storing firmware, configuration data, and user data in devices like smartphones, tablets, smart appliances, and embedded systems, enabling fast read and write operations in compact form factors.

Equivalent

The W25Q64FVSFIG is a 64Mb (8MB) SPI NOR flash memory chip. Equivalent products include the Micron MT25QL064, Winbond W25Q64JV, and the GigaDevice GD25Q64. These alternatives offer similar specifications, such as capacity, interface, and voltage requirements. Always verify compatibility for specific applications.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar