W25Q256FVEIQ

Las imágenes son solo para referencia

W25Q256FVEIQ

IC FLASH 256MBIT SPI/QUAD 8WSON

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tube
Series SpiFlash®
ProductStatus Discontinued at Digi-Key
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NOR
MemorySize 256Mb (32M x 8)
MemoryInterface SPI - Quad I/O, QPI
ClockFrequency 104 MHz
WriteCycleTime-WordPage 50µs, 3ms
Voltage-Supply 2.7V ~ 3.6V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-WDFN Exposed Pad

Descripción general

Description

The W25Q256FVEIQ is Winbond’s 256-Mbit serial flash memory (W25Q family) designed for firmware storage and data logging in embedded systems. It uses a serial SPI interface with Quad I/O options for higher throughput.
Key points:
- Capacity and addressing: 256 Mbit (32 MB); supports standard SPI commands with 4-byte addressing for full memory access.
- Interface and speed: SPI-compatible; Quad I/O/Quad Output modes available for faster data transfer.
- Organization: 256-byte pages; 4 KB sectors; 64 KB and 256 KB blocks.
- Endurance and retention: non-volatile memory with typical flash endurance and long data retention.
- Features: JEDEC ID, status registers, hardware/ software write protection, deep power-down mode.
- Reliability and variants: available in industrial-grade versions; suitable for boot flash and firmware storage.
- Package: commonly 8-pin SOIC/WDF type.
Note: exact electrical specs (voltage range, timing, endurance) vary by variant; consult the Winbond datasheet for detailed parameters and supported commands.

Package

The W25Q256FVEIQ uses an 8-pin SOP (SOIC-8) surface-mount package (RoHS-compliant).

Pinout

- Pin count: 8 pins (SOP-8)
- Function: 256 Mbit serial flash memory with SPI interface (Winbond W25Q256FVEIQ). Pins:
- Pin 1: CS# (chip select)
- Pin 2: DO/MISO
- Pin 3: WP#
- Pin 4: GND
- Pin 5: DI/MOSI
- Pin 6: CLK (SCK)
- Pin 7: HOLD#
- Pin 8: VCC

Manufacturer

- Manufacturer: Winbond Electronics Corporation.
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures memory products (notably NOR flash and DRAM), supplying memory solutions for electronic devices.

Application

W25Q256FVEIQ is a 256‑Mbit serial SPI flash memory used as nonvolatile storage in embedded systems. Typical applications:
- Firmware storage and boot code for microcontrollers/SoCs
- Firmware updates and bootloaders
- External storage for IoT devices, consumer electronics, set‑top boxes
- Data logging, calibration, and configuration storage in industrial/automotive systems
- Expanded program/data storage for network devices and other embedded platforms

Equivalent

Equivalents (256-Mbit SPI flash) include:
- Macronix MX25L25645G (and MX25L25635F)
- GigaDevice GD25Q256C
- Micron N25Q256A
- ISSI IS25LP256D
- Puya P25Q256H
Note: verify voltage (1.8V/3.3V), interface (SPI/DUAL/QUAD/QPI), timing, and package for pin compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria