W25Q128JVPIQ

Las imágenes son solo para referencia

W25Q128JVPIQ

IC FLASH 128MBIT SPI/QUAD 8WSON

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series SpiFlash®
Part Status Active
Base Product Number W25Q128
DigiKey Programmable Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 128Mbit
Memory Organization 16M x 8
Memory Interface SPI - Quad I/O, QPI
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 3ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-WDFN Exposed Pad
Supplier Device Package 8-WSON (6x5)
Packaging Tube

Descripción general

Description

The W25Q128JVPIQ is a high-performance serial NOR Flash memory device produced by Winbond. It features a storage capacity of 128 megabits (16 megabytes) and operates using a SPI (Serial Peripheral Interface) protocol, making it suitable for various embedded applications. This memory supports a range of programming and erasing functions, including a 4KB sector erase, 32KB block erase, and full chip erase, allowing for flexible data management.
Key features include fast read speeds of up to 104 MHz, low power consumption, and a wide voltage range of 2.7V to 3.6V, which enhances its applicability in battery-operated devices. It also incorporates advanced security features, such as a write protection mechanism and an OTP (One-Time Programmable) area, ensuring data integrity and security.
The W25Q128JVPIQ is commonly used in applications like consumer electronics, automotive systems, and IoT devices, where reliable and efficient non-volatile memory is essential. Its compact 8-pin SOP package allows for easy integration into various circuit designs.

Features

The W25Q128JVPIQ is a 128Mb (16MB) Serial NOR Flash memory from Winbond, featuring the following key attributes:
1. Interface: SPI (Serial Peripheral Interface) with support for dual and quad I/O modes.
2. Speed: Max clock frequency of up to 104 MHz in standard SPI mode.
3. Data Transfer: Fast read and programming speeds with read capabilities reaching up to 80 MB/s.
4. Voltage Range: Operates within a supply voltage of 2.7V to 3.6V.
5. Memory Organization: It has a uniform sector architecture with 256 sectors of 64KB each, and supports 4KB sub-sectors.
6. Endurance: Approximately 100,000 program/erase cycles per sector.
7. Data Retention: Typically 20 years at 85°C.
8. Package Options: Available in various packages, including SOP, WSON, and BGA.
9. Security Features: Supports hardware and software write protection for data security.
This device is ideal for applications requiring reliable, high-performance memory, such as consumer electronics, automotive, and industrial devices.

Package

The W25Q128JVPIQ is packaged in a 16-pin SOIC (Small Outline Integrated Circuit) package. It is commonly found in a 300 mil width with a standard footprint for easy integration into electronic circuits.

Pinout

The W25Q128JVPIQ is a 128Mb (16MB) Serial NOR Flash memory chip with a total of 8 pins. The pin functions are as follows:
1. CS# (Chip Select) - Active low, used to select the device.
2. SO (Serial Output) - Data output pin for reading data.
3. SI (Serial Input) - Data input pin for writing data.
4. SCK (Serial Clock) - Clock input for synchronizing data transfers.
5. WP# (Write Protect) - Active low; can be used to protect memory from unintended writes.
6. HOLD# - Active low; pauses the operation without resetting the device.
7. VCC - Power supply pin (typically 2.7V to 3.6V).
8. GND - Ground pin.
This chip supports the SPI (Serial Peripheral Interface) protocol, allowing for high-speed data transfer and is commonly used in embedded systems for code storage and data logging applications.

Manufacturer

The W25Q128JVPIQ is manufactured by Winbond Electronics Corporation, a Taiwanese semiconductor company. Winbond specializes in memory solutions, including NOR flash memory, DRAM, and other integrated circuits. They are known for producing high-performance memory products for various applications, such as consumer electronics, automotive, industrial, and networking devices. Winbond has established a strong presence in the global semiconductor market, focusing on innovation and quality in their product offerings.

Application

The W25Q128JVPIQ is a 128 Mb serial NOR Flash memory typically used in applications such as firmware storage, embedded systems, IoT devices, automotive electronics, consumer electronics, and industrial automation. Its fast read speeds, low power consumption, and reliability make it ideal for data storage in applications requiring quick access and durability.

Equivalent

The W25Q128JVPIQ is a 128Mb (16MB) SPI flash memory chip from Winbond. Equivalent products include the Micron MT25QL128ABA, Micron MT25QL128B, and the Spansion S25FL128S. Other comparable alternatives may include devices from manufacturers like Cypress and Adesto Technologies, but always verify compatibility in terms of pinout, voltage, and performance specifications.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria