VND5E050MJTR-E

Las imágenes son solo para referencia

VND5E050MJTR-E

IC PWR SWTCH N-CHAN 1:1 PWRSSO12

  • Fabricante
  • Mfr. Parte #VND5E050MJTR-E
  • Paquete HSOP12
  • Hoja de datos
  • En stock3473

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
Series VIPower™
ProductStatus Obsolete
SwitchType General Purpose
NumberofOutputs 2
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType N-Channel
Interface On/Off
Voltage-Load 4.5V ~ 28V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 19A
RdsOn(Typ) 50mOhm (Max)
InputType Non-Inverting
Features Auto Restart
FaultProtection Current Limiting (Fixed), Over Temperature, Over Voltage
OperatingTemperature -40°C ~ 150°C (TJ)
MountingType Surface Mount
SupplierDevicePackage PowerSSO-12™

Descripción general

Description

VND5E050MJTR-E is an automotive high-side smart load switch from STMicroelectronics’ VIPower family. It integrates a high-side MOSFET with protection and diagnostic features to drive loads directly from a microcontroller.
Key points:
- Ratings: supports automotive voltages up to ~60 V and typical load currents around 5 A.
- Protections: current limit/overcurrent, short-to-ground, overvoltage, undervoltage, and thermal shutdown.
- Diagnostics: built-in fault/diagnostic output to report status to the controller.
- Control: EN/IN input to enable/disable the switch.
- Packaging: small HV package (TR-E = tape-and-reel), suitable for automotive PCB assemblies.
- Applications: LED lighting, relays/solenoids, pumps, and other motor/actuator loads in vehicles.
In short, it provides a compact, protected, and easy-to-control high-side switch to simplify automotive load driving and reduce external components.

Features

Concise features of VND5E050MJTR-E:
- 1-channel high-side smart switch with integrated MOSFET, rated for about 5 A.
- Current limit with short-circuit protection and auto-retry.
- Thermal shutdown protection to prevent damage.
- Undervoltage lockout and overvoltage protection.
- Diagnostic feedback via DIAG/open-load status for MCU monitoring.
- Slew-rate control / soft-start to limit inrush current.
- Reverse polarity protection and safe-off behavior in fault conditions.
- Automotive-grade device (AEC-Q100 qualified) suitable for 12 V systems and load-dump tolerant designs.
- Suitable applications: automotive actuators, solenoids, LEDs, and other load-switched circuits.

Package

PowerSSO-28 (28-pin) package with an exposed pad; Tape & Reel (TR) version.

Pinout

- Pin count: 28-pin package (HTSSOP-28 style)
- Function: VIPower 5-channel high-side switch array with current limitation and diagnostic. Provides five integrated load switches (high-side) with protection (short-circuit/overcurrent, thermal), suitable for automotive loads (lamps, solenoids, etc.), controlled by IN/EN and monitored via diagnostic outputs.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A global semiconductor and electronics company (multinational) that designs and manufactures integrated circuits, power devices, MEMS sensors, microcontrollers, and other semiconductor solutions.

Application

VND5E050MJTR-E is a 5-channel high-side switch designed for automotive body electronics. Applications: drive multiple loads (lamps, relays, solenoids, actuators, sensors, HVAC components) from a vehicle power line. Features include integrated protection and diagnostics: undervoltage, overcurrent/short-to-ground, short-to-battery, thermal shutdown, and current limiting, enabling safe, compact load switching and power distribution.

Equivalent

VND5E050MJTR-E is STMicroelectronics VIPower: a 60 V, ~5 A high-side smart switch with current limit and diagnostic.
Possible equivalents from other vendors:
- Infineon: TLE9250-1Q or TLE9255-1Q (60 V smart high-side switches)
- TI: TPS22960/TPS22962 (6 A load switches with diagnostic)
Note: exact cross-reference depends on package, current limit, and diagnostic features; verify electrical specs and pinout.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar