UC2842BNG

Las imágenes son solo para referencia

UC2842BNG

IC REG CTRLR BST FLYBK ISO 8-DIP

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier onsemi
Package Tube
ProductStatus Active
OutputType Transistor Driver
Function Step-Up, Step-Up/Step-Down
OutputConfiguration Positive, Isolation Capable
Topology Boost, Flyback
NumberofOutputs 1
OutputPhases 1
Voltage-Supply(Vcc/Vdd) 10V ~ 30V
Frequency-Switching Up to 500kHz
DutyCycle(Max) 96%
SynchronousRectifier No
ClockSync No
ControlFeatures Frequency Control
OperatingTemperature -25°C ~ 85°C (TA)
MountingType Through Hole
Package/Case 8-DIP (0.300, 7.62mm)

Descripción general

Description

UC2842BNG is an 8-pin PWM controller IC from the UC2842 family, used to regulate switch‑mode power supplies. It implements current‑mode PWM control with an oscillator, internal reference, and an output stage to drive a power MOSFET. Key features typically include soft‑start, undervoltage lockout, current limit, and the ability to set switching frequency with external RT/CT components. It is designed for offline SMPS topologies (especially flyback/forward) and uses an optocoupler for feedback from the secondary side.
BNG suffix indicates a Pb‑free/RoHS‑compliant variant in a specific package; check the datasheet for exact package type.
Common applications: small offline adapters, power supplies, LED drivers.
For exact electrical specs, pinout, and application circuits, consult the UC2842BNG datasheet.

Features

Key features of UC2842BNG (8-pin, RoHS packaging):
- High-voltage current-mode PWM controller for off-line SMPS (flyback, buck/boost)
- Built-in start-up current source and ability to operate from rectified mains
- 5V reference and transconductance/error amplifier for feedback
- Oscillator with external RT for frequency setting (typical tens of kHz range)
- Peak current-mode control with slope compensation
- UVLO (undervoltage lockout) for reliable startup
- Pulse-by-pulse overcurrent/short-circuit protection with latch
- Soft-start to limit inrush and rise time
- Gate-drive capable output for external power transistor (MOSFET)
- Protection features with latch reset on fault
- Packaging: 8-pin DIP/SOIC variants (BNG indicates RoHS lead-free version)
Note: exact electrical ranges (voltage, frequency) vary by variant; consult the datasheet for your specific part revision.

Package

An 8-pin PDIP (DIP-8) package; RoHS lead-free variant (G suffix).

Pinout

- Pin count: 8 pins (DIP-8 / SOIC-8 package; UC2842BNG is the 8‑pin version).
Pin functions (by pin number):
- 1: COMP – Error amplifier output (compensation node)
- 2: VFB (Feedback) – Inverting input of the error amplifier (receives optocoupler signal)
- 3: IS – Current-sense input (primary current sensing)
- 4: RT/CT – Oscillator timing inputs (set frequency with RT and CT)
- 5: GND – Ground
- 6: Vcc – Supply voltage
- 7: OUT – Output drive for the power switch (to drive MOSFET/transistor)
- 8: Vref – 5V reference output (bias for the error amp/feedback network)
Description: UC2842BNG is a current-mode PWM controller for switch‑mode power supplies, providing fixed frequency operation, error‑amplifier control, current sense, and an output to drive the main switch.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational semiconductor company that designs, manufactures, and sells analog and embedded processing integrated circuits and related silicon devices.

Application

- Isolated off-line SMPS (flyback/forward) for AC-DC adapters, TVs/monitors, printers, and set-top boxes
- Standby/auxiliary power supplies in telecom and data equipment
- Low-to-mid power buck/boost regulator designs
- LED driver circuits requiring current‑mode PWM control

Equivalent

Closest equivalents are from the same PWM controller family:
- UC3842/UC3843 (TI/other vendors) – similar current-mode PWM control and usually pin-compatible in many boards
- Some vendors offer KA3842/KA3843 variants (clones)
Important: pinout, startup current, soft-start, and error-amp behavior can differ. Verify datasheets and adjust PCB or component values as needed for a proper drop-in replacement.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar