TPS78326DDCR

Las imágenes son solo para referencia

TPS78326DDCR

IC REG LINEAR 2.6V 150MA SOT23-5

  • Fabricante
  • Mfr. Parte #TPS78326DDCR
  • Paquete SOT23-5
  • Hoja de datos
  • En stock9971

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
OutputConfiguration Positive
OutputType Fixed
NumberofRegulators 1
Voltage-Input(Max) 5.5V
Voltage-Output(Min/Fixed) 2.6V
VoltageDropout(Max) 0.25V @ 150mA
Current-Output 150mA
Current-Quiescent(Iq) 800 nA
Current-Supply(Max) 8 µA
PSRR 40dB ~ 15dB (10Hz ~ 1kHz)
ControlFeatures Enable
ProtectionFeatures Over Current, Over Temperature, Reverse Polarity
OperatingTemperature -40°C ~ 105°C
MountingType Surface Mount
Package/Case SOT-23-5 Thin, TSOT-23-5

Descripción general

Description

TPS78326DDCR is a fixed-output low-dropout regulator (LDO) from TI’s TPS783 family. The “26” in the name indicates the nominal output voltage, and “DDCR” denotes the package/pinout (an 8-pin device in a DDCR package). It accepts a higher input and provides a stable output with low quiescent current and good line/load regulation. Key features typically include an enable (on/off) control, current‑limit protection, thermal shutdown, short‑circuit protection, and ESD protection. It’s suitable for space‑constrained, battery‑powered designs feeding microcontrollers, sensors, and other ICs. For exact electrical specs (input voltage range, dropout at load, quiescent current, enable behavior, and pinout), consult the TI datasheet and product page.

Features

TPS78326DDCR features (highlights):
- Fixed output: 2.6 V LDO
- Low dropout regulator for efficient operation
- Enable (EN) input to shut down/regain output
- Very low quiescent current (low idle power)
- Short-circuit/overcurrent protection and thermal shutdown
- Stable with ceramic output capacitors (low ESR)
- Input voltage range suitable for common 2.5–5.5 V supplies
- Roughly up to tens-of-milliamps-to-100+ mA output capability (design depends on package/conditions)
- RoHS-compliant and packaged in the DDCR 6-pin format for small footprint and good thermal performance
- Operating temperature typically extended (e.g., −40°C to +125°C)
Note: For exact electrical specs (current limit, dropout, quiescent current, exact input range, and package details), please consult the TPS78326DDCR datasheet.

Package

SOT-23-5 (5-pin) package.

Pinout

- Pin count: 8 pins (VSSOP-8, DDCR package)
- Function: Fixed‑output low-dropout regulator (LDO) with enable; provides a regulated 2.6 V output from an input supply.

Manufacturer

Manufacturer: Texas Instruments (TI).
TI is an American multinational semiconductor company that designs and manufactures a broad range of integrated circuits, with a focus on analog and embedded processing products. It is headquartered in Dallas, Texas.

Application

TPS78326DDCR is a low-dropout fixed regulator. Typical applications: power rails for microcontrollers and digital ICs in portable/battery-powered products; IoT sensors and wearables; RF/wireless transceivers and front-end modules; audio and sensing circuits needing clean, stable supply; embedded systems in consumer electronics (cameras, set-top boxes) and medical/industrial instrumentation; small form-factor power-management sections; any application requiring a low-noise, low-quiescent-current LDO.

Equivalent

TPS78326DDCR is TI’s 2.6 V fixed LDO in an 8-pin DDCR package. For cross-references, look for other vendors’ 2.6 V fixed LDOs with similar current (~100–200 mA) and footprint. Common candidates include Microchip MIC5219-2.6/MIC5205-2.6 and Analog Devices ADP170-2.6 (verify quiescent current and package). For an exact cross, use TI’s Cross Reference tool or share your required current/footprint.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar