TPS2547RTER

Las imágenes son solo para referencia

TPS2547RTER

IC PWR SWITCH N-CHAN 1:1 16WQFN

  • Fabricante
  • Mfr. Parte #TPS2547RTER
  • Paquete WQFN-16
  • Hoja de datos
  • En stock7010

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType USB Switch
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType N-Channel
Interface On/Off
Voltage-Load 4.5V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 3A
RdsOn(Typ) 73mOhm
Features Status Flag
FaultProtection Current Limiting (Adjustable), Over Temperature
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 16-WQFN (3x3)

Descripción general

Description

TPS2547RTER is a Texas Instruments USB port power switch (high-side switch) from the TPS2547 family. It provides controlled VBUS switching with built‑in protection: current‑limit, reverse‑current blocking, overcurrent protection, and thermal shutdown, plus fault/status signaling. The device is enabled/disabled via an input (EN) and is designed to protect both USB hosts and downstream devices while allowing software control of VBUS. The “RTER” suffix typically indicates Tape‑and‑Reel packaging for automated assembly. Suitable applications include USB hubs, chargers, and portable devices needing safe, controlled VBUS power distribution.

Features

TPS2547RTER features (concise):
- Dual high-side power switches for 5V rails (USB-ready) with protection on each output.
- Overcurrent/short-circuit protection (hiccup mode) per channel.
- Overvoltage (OVP) and undervoltage (UVLO) protection.
- Thermal shutdown protection.
- Soft-start/inrush current limiting to protect downstream devices.
- Enable control for each channel and fault/status signaling (open-drain/output).
- Reverse current protection for safe power-downs.
- Low quiescent current for efficiency.
- Suitable input range around 2.7–5.5 V (USB-compatible).
- Packaging: Tape-and-reel (RTER) for automated assembly.
Note: This is a high-level summary of typical TPS2547R family capabilities; refer to the datasheet for exact electrical specs and pin behavior.

Package

TPS2547RTER is in an 8‑pin VSSOP (VSSOP‑8) package. It’s RoHS‑compliant and shipped on Tape & Reel.

Pinout

- Pin count: 14 pins (package type referenced by RTER suffix).
- Function: USB port protection switch with hot-swap capability, providing current limiting and overcurrent protection, plus enable and status/fault signaling.

Manufacturer

- Manufacturer: Texas Instruments Incorporated (TI)
- What kind of company: An American multinational semiconductor company that designs and manufactures analog, digital, mixed-signal, and embedded processing integrated circuits and related electronics.

Application

Application areas of TPS2547RTER:
- USB port power distribution for hosts, hubs, and docking stations
- Downstream USB ports in laptops, tablets, and consumer electronics needing current limit and fault protection
- USB chargers and power adapters with inrush/short-circuit protection
- Embedded/industrial equipment and telecom gear with USB interfaces
- Any system requiring a single-channel, protected USB power switch

Equivalent

TPS2547RTER is a USB port power switch with overcurrent protection and current limit. There isn’t a one‑to‑one cross reference. Comparable devices from other vendors exist (e.g., On Semiconductor, Analog Devices, STMicroelectronics, Renesas) marketed as USB port power switches with OC protection and adjustable current limit. For exact substitutes, provide: supply voltage, desired current limit, number of channels, and package. I can then list precise part numbers.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar