TLE9104SHXUMA1

Las imágenes son solo para referencia

TLE9104SHXUMA1

IC POWERTRAIN SWITCH DSO20-88

  • Fabricante
  • Mfr. Parte #TLE9104SHXUMA1
  • Paquete
  • Hoja de datos
  • En stock7760

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
Switch Type General Purpose
Number of Outputs 4
Ratio - Input:Output 1:1
Output Configuration Low Side
Output Type N-Channel
Interface SPI
Voltage - Load 50V ~ 60V
Voltage - Supply (Vcc/Vdd) 3V ~ 5.5V
Current - Output (Max) 3A
Rds On (Typ) 150mOhm
Input Type Non-Inverting
Features Slew Rate Controlled, Status Flag
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Reverse Battery, Short Circuit
Operating Temperature -40°C ~ 150°C
Mounting Type Surface Mount
Supplier Device Package PG-DSO-20-88
Package / Case 20-BFSOP (0.295", 7.50mm Width) Exposed Pad
Base Product Number TLE9104

Descripción general

Description

The TLE9104SHXUMA1 is a high-performance integrated circuit designed for automotive applications, specifically for motor control and driver functions. It is part of the TLE9104 family from Infineon Technologies, which is known for robust automotive standards. The device features a dual H-bridge configuration, allowing it to control DC motors or stepper motors efficiently.
Key specifications include support for high current capacities, thermal protection, and a range of operating voltages suitable for automotive environments. The TLE9104SHXUMA1 is equipped with built-in diagnostics, which enhance reliability and ease of integration into automotive systems. It typically interfaces with microcontrollers through PWM signals, enabling precise control over motor speed and direction.
This IC is ideal for various applications in electric steering, seat adjustment, and other motor-driven functions in vehicles, providing a compact and efficient solution for automotive engineers looking for reliable motor control solutions.

Features

The TLE9104SHXUMA1 is a quad high-side driver designed for automotive applications, specifically for driving loads such as motors, lamps, and other components. Key features include:
1. Quad High-Side Driver: Capable of controlling four independent outputs.
2. Integrated Protection: Features overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.
3. High Voltage Capability: Supports load voltages up to 40V, suitable for automotive environments.
4. Low RDS(on): Provides efficient operation with low on-resistance for reduced power loss.
5. Diagnostics: Includes fault detection for short circuits and overtemperature conditions.
6. Flexible Control: Compatible with various control signals, allowing for easy integration into automotive systems.
7. Package: Offered in a compact HTQFP package, facilitating space-saving designs.
This device is ideal for various applications in electric and hybrid vehicles, enhancing system reliability and efficiency.

Package

The TLE9104SHXUMA1 is packaged in a TQFP-48 (Thin Quad Flat Package) format. This surface-mount package is designed for efficient thermal management and compact PCB layout.

Pinout

The TLE9104SHXUMA1 is a quad low-side driver IC from Infineon Technologies. It features a total of 14 pins, with the following key functions:
1. Pins 1-4 (OUT1 to OUT4): Output pins for driving the connected loads.
2. Pin 5 (GND): Ground connection.
3. Pin 6 (VS): Supply voltage input.
4. Pin 7 (IN1 to IN4): Input control pins for enabling/disabling the outputs.
5. Pin 8 (NC): Not connected (reserved for future use).
6. Pin 9 (DIAG): Diagnostic output for fault indication.
7. Pin 10 (VREF): Reference voltage for internal circuits.
8. Pin 11 (ISENSE): Current sense feedback for overload detection.
9. Pin 12 (RCS): External resistor connection for current sensing.
10. Pin 13 (DIODE): Internal flyback diode for inductive load protection.
11. Pin 14 (GND): Additional ground connection.
This IC is commonly used in automotive applications for controlling motors and other inductive loads.

Manufacturer

The TLE9104SHXUMA1 is manufactured by Texas Instruments, Inc. (TI), a prominent American technology company. Founded in 1930, Texas Instruments specializes in the design and production of semiconductors and various integrated circuits, which are used in a wide range of electronic devices and applications. The company is well-known for its innovations in analog electronics, digital signal processing, and embedded systems. Texas Instruments serves multiple markets, including automotive, industrial, communications, and consumer electronics, making it a key player in the global semiconductor industry.

Application

The TLE9104SHXUMA1 is a high-voltage, quad-channel, integrated circuit primarily used in automotive applications for motor control. It is suitable for driving various loads such as DC motors, stepper motors, and solenoids. Common applications include power window control, seat adjustment systems, and HVAC actuators. Its robust design supports high-temperature environments and enhances reliability in automotive electronics.

Equivalent

The TLE9104SHXUMA1 is a voltage regulator and power management IC. Equivalent products include the TLE9105SHXUMA1, which offers similar functionalities, and other voltage regulators like the LM7805 or LM1117, depending on specific application requirements. Always verify pin compatibility and specifications to ensure suitability.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar