TCAN2451RHBRQ1

Las imágenes son solo para referencia

TCAN2451RHBRQ1

AUTOMOTIVE CAN FD SIC SYSTEM BAS

  • Fabricante
  • Mfr. Parte #TCAN2451RHBRQ1
  • Paquete
  • Hoja de datos
  • En stock7422

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
Type Transceiver
Protocol CANbus
Number of Drivers/Receivers 1/1
Duplex Half
Data Rate 8Mbps
Voltage - Supply 5.5V ~ 28V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount, Wettable Flank
Package 32-VFQFN Exposed Pad
Supplier Device Package 32-VQFN (5x5)
Packaging Tape & Reel (TR)
Grade Automotive
Qualification AEC-Q100

Descripción general

Description

TCAN2451RHBRQ1 is a Texas Instruments CAN transceiver (part of the TCAN family). It provides the physical layer between a CAN controller and the two-wire CAN bus. The device converts the controller’s TXD into differential CAN_H/CAN_L signals and translates bus differential signals back into RXD, while offering protection and fault functions. Key features typically include undervoltage lockout, protection against short circuits and ESD, wake-up/fault indication, and a standby mode. It is designed for automotive and industrial CAN networks and complies with ISO 11898 standards (and related CAN variants, depending on the exact part). The suffix RHBRQ1 denotes a specific package/grade/qualification option for this device; see the datasheet for exact electrical specs, pinout, and environmental ratings. If you want, I can pull a concise features table from the datasheet.

Features

Here are the typical features of the TI TCAN2451RHBRQ1 CAN transceiver (concise):
- CAN transceiver for CAN 2.0A/B with data rate up to 1 Mbps
- Automotive-grade, AEC-Q-qualified device (-40°C to 125°C)
- EN/Standby control for low-power/sleep mode
- TXD/RXD interface with standard CAN signaling; 5V/3.3V supply compatibility
- Robust bus protection: withstands automotive transients and fault conditions (short to battery/ground)
- ESD protection on CANH and CANL pins
- Low quiescent current in recessive/standby
- Overcurrent/overtemperature protection for rugged operation
- Small, automotive-packaged device (RHBRQ1 family/package)
Note: exact electrical specs (voltages, current numbers, and temperature range) can vary by revision; consult the TCAN2451RHBRQ1 datasheet for precise parameters.

Package

8-pin HTSSOP package (HTSSOP-8).

Pinout

- Pin count: 8 pins (VSSOP-8 package)
- Function: CAN transceiver. Provides the physical layer between a CAN controller and the CAN bus (CANH/CANL). Converts TXD (controller side) to bus signals and bus signals to RXD (controller side), with VCC/GND and control pins (enable/standby) for device operation.

Manufacturer

- Manufacturer: Texas Instruments (TI)
- Company type: American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing ICs for automotive, industrial, and consumer electronics.

Application

Application areas of TCAN2451RHBRQ1:
- Automotive in-vehicle networks (CAN and CAN FD) for body, chassis, powertrain
- Industrial automation and factory floor control
- Robotics and motion-control systems
- Building automation (HVAC, lighting, access control)
- Electric motor drives and power electronics
- Agricultural and rugged/heavy equipment
- Remote sensing, telemetry and IoT nodes in harsh environments

Equivalent

Equivalent parts (CAN high‑speed transceivers with similar specs) include:
- Microchip MCP2551, MCP2561
- NXP TJA1040, TJA1042, TJA1050
- TI SN65HVD230, SN65HVD231, SN65HVD234
- Infineon TLE9250, TLE9251
- PCA82C250 (older Philips/NXP)
Note: cross-reference by voltage, data rate, standby, and pinout to ensure exact compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar