STM32L476QGI6TR

Las imágenes son solo para referencia

STM32L476QGI6TR

IC MCU 32BIT 1MB FLASH 132UFBGA

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
Series STM32L4
ProductStatus Active
CoreProcessor ARM® Cortex®-M4
CoreSize 32-Bit Single-Core
Speed 80MHz
Connectivity CANbus, EBI/EMI, I²C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, SWPMI, UART/USART, USB OTG
Peripherals Brown-out Detect/Reset, DMA, LCD, PWM, WDT
NumberofI/O 109
ProgramMemorySize 1MB (1M x 8)
ProgramMemoryType FLASH
RAMSize 128K x 8
Voltage-Supply(Vcc/Vdd) 1.71V ~ 3.6V
DataConverters A/D 19x12b; D/A 2x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 132-UFBGA

Descripción general

Description

STM32L476QGI6TR is STMicroelectronics’ ultra-low-power MCU from the STM32L4+ family. It uses the ARM Cortex-M4F core (with FPU and DSP features) and runs up to about 80 MHz, optimized for energy efficiency in battery-powered devices. It integrates on‑chip Flash and SRAM (sizes vary by variant) and offers a rich peripheral set.
Key features:
- Peripherals: ADCs, DAC, op-amps, comparators, timers, RTC, I2C, SPI, USART/UART/I2S, CAN, USB FS, and SDIO.
- LCD controller for graphics/display support.
- Security/reliability: cryptographic accelerators, RNG, CRC, MPU.
- Power management: multiple low‑power modes (Run, Sleep, Stop, Standby) with fast wakeup and DMA.
- Development: supported by STM32CubeMX, HAL/LL libraries, and SWD debugging.
Package: QGI6TR indicates a specific 64‑pin package with Tape & Reel packaging.
Typical uses: wearables, sensors, portable instrumentation, and other low‑power embedded applications requiring integrated peripherals and long battery life.

Features

Key features of STM32L476QGI6TR (100‑pin LQFP, TR):
- Core: 32‑bit ARM Cortex‑M4F with DSP instructions and single‑precision FPU
- Speed: up to 80 MHz operation
- Memory (variant dependent): up to 1 MB Flash and up to 128 KB RAM
- Power: wide voltage range (1.65–3.6 V), ultra‑low‑power modes (Stop, Standby), RTC with VBAT
- Peripherals: USB 2.0 Full‑Speed device, multiple USART/UART, I2C, SPI, DMA, 12‑bit ADC (multi-channel), timers and PWM, CRC engine
- Security/robustness: hardware CRC for data integrity
- Package: QFP100 (LQFP, 100 pins), suitable for space‑constrained designs
- Temperature: industrial temp range (-40 °C to 85 °C)
- Ecosystem: supported by ST HAL/LL libraries and STMicroelectronics development tools
Note: exact memory sizes and peripheral availability depend on the specific device variant within the STM32L4+ family. Always verify the datasheet for the L476QGI6TR configuration you’re using.

Package

LQFP-64 (QG) package, 10×10 mm body; Tape-and-Reel (TR) packaging.

Pinout

- Pin count: 100 pins (LQFP-100 package)
- Function: 32-bit ARM Cortex-M4 microcontroller (STM32L4 series) with low-power features and rich peripherals (USB, ADC/DAC, timers, I2C/SPI/UART, CAN, LCD controller, etc.) for embedded control applications.

Manufacturer

Manufacturer: STMicroelectronics (ST).
What kind of company: A French-Italian multinational semiconductor company that designs and manufactures microelectronics, including microcontrollers (STM32), MEMS sensors, and power management ICs.

Application

- Wearables and health/fitness devices
- Battery-powered IoT sensors, data loggers and asset trackers
- Smart metering, energy monitoring and portable instrumentation
- Industrial IoT, sensor hubs and building automation
- HMI/display-enabled consumer electronics and remotes
- Portable medical and diagnostic devices
- Data-logging handheld instruments
- Automotive interior instrumentation (non-safety-critical)

Equivalent

There isn’t an exact cross‑vendor substitute for STM32L476QGI6TR. Closest alternatives by feature (Cortex‑M4F, low power, similar flash/RAM, USB/LCD, crypto) are:
- NXP LPC55S69 family (Cortex‑M33, crypto, USB, LCD)
- TI MSP432P4x family (Cortex‑M4F, ultra‑low power, USB)
- Renesas RA4M1/RA6M3 families (Cortex‑M4F, 1 MB+ flash, crypto)
Note: peripherals, pinout and memory differ—verify against your requirements.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar