STM32G474RCT3

Las imágenes son solo para referencia

STM32G474RCT3

IC MCU 32BIT 256KB FLASH 64LQFP

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier STMicroelectronics
Package Tray
Series STM32G4
ProductStatus Active
CoreProcessor ARM® Cortex®-M4F
CoreSize 32-Bit Single-Core
Speed 170MHz
Connectivity CANbus, I²C, IrDA, LINbus, QSPI, SPI, UART/USART
Peripherals Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
NumberofI/O 52
ProgramMemorySize 256KB (256K x 8)
ProgramMemoryType FLASH
RAMSize 128K x 8
Voltage-Supply(Vcc/Vdd) 1.71V ~ 3.6V
DataConverters A/D 26x12b; D/A 7x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 64-LQFP

Descripción general

Description

STM32G474RCT3 is a 32‑bit MCU from ST’s STM32G4 family, designed for mixed‑signal and motor‑control applications. It combines an ARM Cortex‑M4F core (DSP instructions and FPU) up to about 170 MHz with rich analog and timing peripherals. On‑chip analog includes multiple 12‑bit ADCs, DACs, and programmable op‑amps/comparators, plus advanced control timers suitable for motor control. It provides DMA and multiple connectivity options (USART/UART, SPI, I2C, CAN FD, USB, etc.). Memory options cover flash and RAM sized to fit mid‑volume products; check the exact variant for precise quantities. The G4 feature set emphasizes motor control accelerators, digital filtering, and integrated power‑stage support. The RCT3 suffix specifies a particular package and temperature grade; see the datasheet for pin count and footprint. Development is supported by STM32CubeMX, HAL/LL libraries, and common IDEs (Keil, IAR, SW4STM32). Suitable for motor control, power electronics, audio, and other mixed‑signal applications.

Features

Key features of STM32G474RCT3 (G4 family):
- 32-bit ARM Cortex-M4F core with DSP and single-precision FPU
- Up to 170 MHz operation
- Memory: Flash up to 1 MB; RAM up to 256 KB (package dependent)
- Analog peripherals: multiple 12-bit ADCs up to ~5 Msps total, dual 12-bit DACs
- On-chip analog: comparators and rail-to-rail op-amps
- Timers: advanced-control timers plus general-purpose and basic timers (PWM capable)
- DMA controller and memory protection unit (MPU)
- Connectivity: USB 2.0 Full-Speed, CAN, SPI, I2C, USART/UART
- Security/CRC: hardware CRC engine (cryptography support varies by model)
- Power: broad voltage range (approximately 1.65–3.6 V) with multiple low-power modes
- Operating temperature: typically -40 °C to 105 °C
- Package options: available in 48/64-pin LQFP and other small packages (varies by device)
Note: exact Flash/RAM sizes and available peripherals depend on the specific package variant. Check the datasheet for the exact configuration of STM32G474RCT3.

Package

LQFP-64 (Quad Flat Package with 64 pins).

Pinout

- Pin count: 100 pins (LQFP-100 package)
- Function: STMicroelectronics 32-bit microcontroller (STM32G4 family) based on ARM Cortex-M4 (with FPU/DSP), for general embedded control applications (e.g., motor control, sensors) with rich peripherals.

Manufacturer

- Manufacturer: STMicroelectronics (ST).
- Kind of company: A multinational electronics and semiconductor company that designs and manufactures microcontrollers, sensors, power devices, and other ICs.

Application

Typical application areas: motor control (BLDC/PMSM, servo drives), digital power and power-supply control (PWM/feedback loops), industrial automation and robotics, automotive body electronics and e-mobility subsystems, smart devices/IoT edge nodes, audio processing, human–machine interfaces and display controllers, and instrumentation/metering. Includes low-power options for battery-powered devices.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar