STM32F303VDT6

Las imágenes son solo para referencia

STM32F303VDT6

IC MCU 32BIT 384KB FLASH 100LQFP

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier STMicroelectronics
Package Tray
Series STM32F3
ProductStatus Active
CoreProcessor ARM® Cortex®-M4
CoreSize 32-Bit Single-Core
Speed 72MHz
Connectivity CANbus, I²C, IrDA, LINbus, SPI, UART/USART, USB
Peripherals DMA, I²S, POR, PWM, WDT
NumberofI/O 86
ProgramMemorySize 384KB (384K x 8)
ProgramMemoryType FLASH
RAMSize 80K x 8
Voltage-Supply(Vcc/Vdd) 2V ~ 3.6V
DataConverters A/D 39x12b; D/A 2x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 100-LQFP

Descripción general

Description

STM32F303VDT6 is STMicroelectronics’ STM32F3 family MCU, based on an ARM Cortex-M4 core with a hardware FPU and DSP extensions. It runs at up to 72 MHz and combines floating-point/digital-signal capabilities with a rich peripheral set.
Key features (typical, variant-dependent):
- Memory: up to 256 KB Flash and up to 40 KB RAM (check exact package/variant)
- Peripherals: multiple 12-bit ADCs, DAC, USB full‑speed, CAN, SPI/I2C/USART, SDIO, and a broad set of timers (including advanced-control PWM)
- DMA and multiple power/low‑power modes
- I/O and package options suitable for embedded, motor control, USB devices, and audio applications
Operating range: roughly 2.0–3.6 V with industrial temperatures in many variants.
Development: supported by STM32CubeMX and HAL/LL libraries, with broad IDE support.
Note: The DT6 suffix denotes a specific package/temperature variant; verify exact pin count, memory, and peripherals in the datasheet for your exact device.

Features

Key features of STM32F303VDT6 (compact summary):
- Core: 32‑bit ARM Cortex-M4 with FPU and DSP instructions, up to 72 MHz
- Memory: up to 256 KB Flash, up to ~48 KB SRAM
- Analog: 12-bit ADC (multi-channel, up to ~5 MSPS); 2× 12-bit DACs
- Timers: multiple general-purpose timers + advanced-control timer for PWM/motor control
- Communication: USB Full-Speed device, CAN 2.0B, USART/UART, SPI, I2C
- DMA: DMA controller for peripherals
- Power/Temp: operating voltage 2.0–3.6 V; industrial temperature range
- Other: rich timers, basic analog comparators/operational features, boot/config option bytes
Note: exact memory sizes and peripheral counts can vary by package/revision; this summary covers the typical capabilities of STM32F303 family devices in the VD(T6) variant.

Package

LQFP-64: 64-pin Thin Quad Flat Pack package (10×10 mm).

Pinout

- Pin count: 100 pins (LQFP-100) for STM32F303VDT6.
- Function: 32‑bit ARM Cortex‑M4 microcontroller (STM32F303 family) with integrated peripherals (USB FS, CAN, ADCs, DACs, timers, etc.) for embedded control.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A multinational semiconductor company that designs and manufactures integrated circuits and electronic components (e.g., microcontrollers like STM32, sensors, analog/power devices). Headquartered in Geneva, Switzerland.

Application

- Motor control (BLDC/stepper/servo drives)
- Power electronics and inverter control
- Industrial automation and process control
- Digital power meters and energy-monitoring devices
- Data acquisition and instrumentation systems
- USB/CAN/other communications-enabled embedded controllers
- Compact embedded solutions requiring DSP/FPU and high-resolution analog (multi-channel ADCs, DACs)

Equivalent

Closest ST equivalents (same MCU family and 100-pin package) are:
- STM32F303VET6
- STM32F303VCT6
These use the same silicon with different flash sizes/packaging. For broader matches, you can also consider other Cortex-M4 ST F3 devices with similar peripherals (e.g., STM32F334, STM32F373). Check ST’s Product Selector for exact pinouts, flash, and package options.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar