STM32F103VDT7

Las imágenes son solo para referencia

STM32F103VDT7

IC MCU 32BIT 384KB FLASH 100LQFP

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tray
Series STM32F1
ProductStatus Active
CoreProcessor ARM® Cortex®-M3
CoreSize 32-Bit Single-Core
Speed 72MHz
Connectivity CANbus, I²C, IrDA, LINbus, SPI, UART/USART, USB
Peripherals DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT
NumberofI/O 80
ProgramMemorySize 384KB (384K x 8)
ProgramMemoryType FLASH
RAMSize 64K x 8
Voltage-Supply(Vcc/Vdd) 2V ~ 3.6V
DataConverters A/D 16x12b; D/A 2x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 105°C (TA)
MountingType Surface Mount
Package/Case 100-LQFP

Descripción general

Description

STM32F103VDT7 is a 32‑bit microcontroller from STMicroelectronics in the STM32F1 family. It uses an ARM Cortex‑M3 core and runs up to 72 MHz. The “VDT7” suffix denotes the device/package variant (100‑pin LQFP in many listings) and related temperature range; exact pinout and memory vary by exact part, so check the datasheet for specifics.
Key features (typical of F1 devices):
- Cortex‑M3 core, up to 72 MHz
- Flash and RAM sizes vary by variant (hundreds of KB Flash, tens of KB RAM on many F1 parts)
- Rich peripherals: multiple USART/UART, SPI, I2C, CAN; USB FS on many variants; 12‑bit ADCs, timers/PWM, DMA, RTC
- Diverse power modes and clocks for flexibility
Development and tooling:
- Supported by STM32CubeMX/CubeIDE, HAL/LL libraries
- Debug with ST‑LINK or similar debuggers
Applications: motor control, data acquisition, sensors, industrial/consumer embedded systems.
Note: For exact specs (flash/RAM, USB yes/no, pins), refer to the STM32F103VDT7 datasheet and reference manual.

Features

STM32F103VDT7 features (concise):
- Core: 32-bit ARM Cortex-M3, up to 72 MHz.
- Memory: 128 KB Flash, 20 KB SRAM.
- Package: 100-pin LQFP (VDT7).
- I/O: ~37 GPIOs.
- Clocks: HSE up to 25 MHz, HSI 8 MHz; SYSCLK up to 72 MHz.
- Peripherals: USB 2.0 Full‑Speed device, CAN 2.0B, SPI (2), I2C (2), USART (3).
- Timers: TIM1 (16‑bit advanced), TIM2–TIM5 (general purpose).
- ADC/DAC: 12‑bit ADC with up to 12 channels (no DAC).
- DMA: Multi-channel DMA controller.
- Power: 2.0–3.6 V supply; operating temp typically -40 to 85°C.
- Low power: Sleep, Stop, Standby modes; RTC support.
- Debug/Boot: SWD/JTAG debug; in-system/boot from Flash.
- Other: Interrupt controller (NVIC), multiple external interrupts, watchdogs.
Note: exact RAM/ peripheral counts may vary slightly by subfamily; VD(T)7 denotes the 100-pin package variant of the F103 line.

Package

LQFP-100. It comes in a 100-pin Low-Profile Quad Flat Pack (LQFP) with a 14x14 mm body.

Pinout

Pin count: 100 pins (LQFP-100 package).
Function: 32‑bit ARM Cortex‑M3 microcontroller from ST’s STM32F1 family (STM32F103V series), running up to 72 MHz with on‑chip Flash/RAM and a rich set of peripherals (GPIO, timers, ADC/DAC, USART, USB/CAN, etc.).

Manufacturer

- Manufacturer: STMicroelectronics (ST).
- What kind of company: STMicroelectronics is a multinational electronics and semiconductor company (global designer, manufacturer, and marketer of semiconductor devices), headquartered in Geneva, Switzerland. It develops products such as microcontrollers (including STM32), MEMS sensors, automotive ICs, and power-management ICs for automotive, industrial, and consumer markets.

Application

Typical application areas for STM32F103VDT7 include:
- Industrial automation and PLC-like control
- Motor control (BLDC/stepper) with PWM
- USB peripheral devices and data interfaces
- Automotive instrumentation and sensor hubs
- Data acquisition and instrumentation systems
- Consumer electronics and home appliances
- IoT/Smart home devices and gateways
- Embedded sensing and control in medical/health devices

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar