SN74LVTH16374DLR

Las imágenes son solo para referencia

SN74LVTH16374DLR

IC FF D-TYPE DOUBLE 8BIT 48SSOP

  • Fabricante
  • Mfr. Parte #SN74LVTH16374DLR
  • Paquete
  • Hoja de datos
  • En stock5407

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series 74LVTH
Part Status Active
Base Product Number 74LVTH16374
Function Standard
Type D-Type
Output Type Tri-State, Non-Inverted
Number of Elements 2
Number of Bits per Element 8
Clock Frequency 160 MHz
Max Propagation Delay @ V, Max CL 4.5ns @ 3.3V, 50pF
Trigger Type Positive Edge
Current - Output High, Low 32mA, 64mA
Voltage - Supply 2.7V ~ 3.6V
Current - Quiescent (Iq) 190 µA
Input Capacitance 3 pF
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 48-SSOP
Package 48-BSSOP (0.295", 7.50mm Width)
Packaging Bulk, Tape & Reel (TR)

Descripción general

Description

The SN74LVTH16374DLR is a TI 16‑bit buffer/driver with tri‑state (3‑state) outputs from the LVTH family. It buffers a 16‑bit data bus and can isolate it from other devices by tri-stating its outputs via an output‑enable control, enabling bus sharing without contention.
Key points:
- 16-bit parallel buffer/driver with 3-state outputs
- Low-voltage operation (Vcc ~1.65–3.6 V); LVTTL/CMOS input compatibility
- Output enable control to place outputs in high impedance
- Used to interface microcontrollers/CPUs to memory, peripherals, or buses; ideal for bus isolation and buffering
- Available in TI RoHS-compliant surface-mount packages (DLR suffix)
For exact pinout, drive strength, propagation delay, and electrical characteristics, consult the SN74LVTH16374DLR datasheet.

Features

Here are the key features of SN74LVTH16374DLR (TI):
- 16-bit D-type register with tri-state outputs (two 8-bit sections)
- Edge-triggered, rising-edge clocking
- Active-low output enable (OE) for 3-state bus operation
- Low-voltage operation (LV series): VCC typically 1.65 V to 3.6 V
- CMOS technology: high-speed, low-power operation
- TTL/CMOS compatible input thresholds
- Suitable for buffering/bus interfacing on microprocessor/mmemory buses
- 100% tested for dynamic performance and ESD protection
- Packaging: standard small-outline (DLR) form factor
Notes: For exact pinout, timing specs (tPD, tCLK, setup/hold), and recommended operating conditions, refer to the TI datasheet.

Package

It comes in a 28‑pin RoHS‑compliant small‑outline package (SOP).

Pinout

- Pin count: 20 pins (DLR package, i.e., 20‑pin SOIC).
- Function: 8-bit D-type latch/register with tri-state outputs (bus buffer/driver). It has D[7:0], Q[7:0], a clock input, an output-enable (OE), plus VCC and GND. When OE is active, Q outputs drive the bus; when OE is disabled, outputs are high-impedance.

Manufacturer

Manufacturer: Texas Instruments (TI).
TI is an American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog, mixed-signal, and embedded processing products; one of the world’s largest semiconductor companies.

Application

SN74LVTH16374DLR is a 16-bit, tri‑state buffer/latch device. Common applications:
- Microprocessor/microcontroller bus buffering and demultiplexing (address/data bus)
- Memory and I/O expansion with 3-state bus drivers
- Data buffering and timing alignment between fast CPUs and slower peripherals
- Level-shifting and interfacing between different logic families
- General-purpose buffering/pipelining in embedded/FPGA-ASIC interfaces
Note: suited for high-speed, low-voltage CMOS environments (LVTTL/TTL compatibility).

Equivalent

Equivalent products (same function: 16-bit D-type register with 3‑state outputs):
- Nexperia 74LVTH16374
- ON Semiconductor MC74LVTH16374 (and related packaging variants)
Note: Use TI’s Cross Reference Tool to find additional cross‑references and exact package options for your region.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar