SI4420BDY-T1-E3

Las imágenes son solo para referencia

SI4420BDY-T1-E3

MOSFET N-CH 30V 9.5A 8SO

  • Fabricante
  • Mfr. Parte #SI4420BDY-T1-E3
  • Paquete
  • Hoja de datos
  • En stock4040

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Vishay Siliconix
Package Tape & Reel (TR),Cut Tape (CT)
Series TrenchFET®
ProductStatus Active
FETType N-Channel
Technology MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss) 30 V
Current-ContinuousDrain(Id)@25°C 9.5A (Ta)
DriveVoltage(MaxRdsOnMinRdsOn) 4.5V, 10V
RdsOn(Max)@IdVgs 8.5mOhm @ 13.5A, 10V
Vgs(th)(Max)@Id 3V @ 250µA
GateCharge(Qg)(Max)@Vgs 50 nC @ 10 V
Vgs(Max) ±20V
PowerDissipation(Max) 1.4W (Ta)
OperatingTemperature -55°C ~ 150°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 8-SOIC

Descripción general

Description

SI4420BDY-T1-E3 is Silicon Labs’ sub‑GHz RF transceiver IC. It is a compact, highly integrated device that combines the RF front end, a PLL/ synthesizer, power amplifier and LNA, plus digital baseband for wireless data at ISM bands roughly from 300 to 1000 MHz. It supports common modulation schemes such as FSK/GFSK and OOK/ASK, with configurable data rates, RSSI, and basic packet handling. The device is controlled via a serial SPI interface and typically operates from a 1.8–3.6 V supply, with configurable output power, channel spacing, and bandwidth for range and power efficiency. The BDY-T1-E3 suffix indicates the particular packaging/ordering variant and RoHS-compliant tape-and-reel form.
Applications include battery-powered wireless sensors, remote controls, home automation, and industrial monitoring.
Getting started: consult the official datasheet and reference designs from Silicon Labs, configure frequency, modulation, data rate, and power via SPI, and implement a RX/TX state machine in your MCU.

Features

Here are typical features of the SI4420BDY-T1-E3 (Silicon Labs sub‑GHz RF transceiver) summarized concisely:
- Multi-band ISM transceiver (commonly 315/433/868/915 MHz variants)
- Modulation: FSK/GFSK, and OOK/ASK support
- Data rate: up to several hundred kbps (typical ~250 kbps)
- Transmit power: adjustable, commonly +10 to +20 dBm
- Receiver sensitivity: very low (high RX sensitivity, e.g., around -110 dBm)
- Integrated RF front end with PLL/VCO; supports automatic frequency control
- Low-power operation with varied power modes; RX/TX currents and sleep current minimized
- On-chip packet engine: CRC, address filtering, length fields, FIFO handling
- Wake-on-Radio / event-driven operation
- SPI control interface with GPIOs and IRQ signaling
- Supply voltage: 1.8–3.6 V
- Temperature range: industrial (typ. -40 to +85 °C)
- Small package (QFN or similar) with RoHS compliance
Note: exact band, data rate, current figures, and packaging can vary by revision. For precise specs, refer to the official datasheet for the T1-E3 variant.

Package

The SI4420BDY-T1-E3 is supplied in a 6-pin SOT-23 package (SOT-23-6), tape-and-reel packaged for automated assembly.

Pinout

Pin count: 8 pins (SO-8/8-lead package).
Function: Dual N-channel enhancement-mode MOSFET (two independent N‑MOSFETs in one package) used for low-voltage power switching. Pins correspond to Gate1, Drain1, Source1, Gate2, Drain2, Source2 with the remaining pins/EPAD used for package drain/substrate and thermal/ground return per the datasheet.

Manufacturer

Manufacturer: Vishay Siliconix (Vishay Intertechnology) — part number SI4420BDY-T1-E3.
What kind of company: Vishay Intertechnology is an American multinational electronic components manufacturer (headquartered in Malvern, PA) that produces discrete semiconductors (MOSFETs, diodes, ICs) and passive components (resistors, capacitors, inductors).

Application

Si4420BDY-T1-E3 is a low-power sub‑GHz RF transceiver for ISM-band links. Application areas:
- Remote controls
- Wireless sensor networks and data loggers
- Home/building automation
- Industrial automation and telemetry
- Asset tracking and logistics
- Metering (electric/gas/water)
- Security systems and alarms
- Smart energy/IoT gateways

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar