PN7160A1HN/C100E

Las imágenes son solo para referencia

PN7160A1HN/C100E

IC NFC CONTROLLER I2C HVQFN40

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier NXP USA Inc.
Package Tray
ProductStatus Active
Type RFID Reader
Frequency 13.56MHz
Standards FeliCa, ISO 14443, ISO 15693, MIFARE, NFC
Interface I²C
Voltage-Supply 1.65V ~ 1.95V, 3V ~ 3.6V
OperatingTemperature -25°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 40-VFQFN Exposed Pad

Descripción general

Description

PN7160A1HN/C100E is NXP’s PN7160 NFC controller IC. It provides an integrated RF front-end and protocol stack to enable NFC reader/writer, card emulation, and peer-to-peer modes for multiple standards.
Key points:
- Protocols: NFC Forum Type A/B, FeliCa, and ISO/IEC 15693 (supporting cards/tags and mobile devices).
- Modes: Reader/Writer, Card Emulation (HCE), and Peer-to-Peer.
- Host interface: I2C or SPI to a microcontroller; handles RF field, anti-collision, timing, etc.
- Security: hardware cryptography (AES/DES), RNG, and secure-data handling for secure elements and HCE.
- Packaging/variant: A1HN denotes the package variant; C100E specifies a temperature/revision grade.
Typical applications:
- Embedded NFC readers in POS terminals and access control
- NFC-enabled devices and tags
- Smart posters and tag/card emulation use cases
Quick integration:
- Connect power, I2C/SPI, IRQ, and RST to the host MCU
- Add RF matching network
- Load firmware and run an NFC stack on the host or via PN7160’s firmware
Note: verify exact electricals and packaging in the latest datasheet.

Features

Here are the typical features of PN7160A1HN/C100E (NXP NFC Front-End):
- 13.56 MHz NFC front-end transceiver
- Supports ISO/IEC 14443 Type A/B and ISO/IEC 15693
- NFC Forum-compliant Tag emulation, Read/Write, and Peer-to-Peer (NFCIP-1)
- Card/tag compatibility: MIFARE DESFire (EV1/EV2), DESFire, Classic, and FeliCa (where firmware supports)
- Host interface options: SPI and I²C (configurable, MCU integration)
- RF field generation, automatic impedance matching, field detection and communication control
- Low-power modes with wake-on-field capability
- Industrial-grade temperature range (typical for A1/HN variants)
- Small-footprint package (A1HN) suitable for compact designs
Note: exact supported card types and crypto features can depend on firmware and revision; verify against the specific datasheet for PN7160A1HN/C100E.

Package

The "/C100E" suffix denotes tape-and-reel shipping (carrier reel, typically 1,000 pcs). For the IC package type (exact LGA/WLCSP/QFN variant and dimensions), please refer to the PN7160 datasheet or NXP ordering information.

Pinout

Pin count: 48 pins (HVQFN package).
Function: PN7160A1HN/C100E is an NFC front-end/controller IC (RF transceiver plus protocol engine) for contactless smart cards (ISO/IEC 14443 Type A/B, ISO/IEC 15693, FeliCa). It interfaces to a host MCU via SPI (and typically I2C), providing the 13.56 MHz RF front end and protocol processing for NFC/RFID applications.

Manufacturer

Manufacturer: NXP Semiconductors N.V. (commonly “NXP”).
What kind of company: NXP is a global Dutch semiconductor manufacturer that designs and supplies mixed-signal and digital integrated circuits and secure connectivity solutions (including NFC/RFID controllers, microcontrollers, processors and automotive, industrial and IoT semiconductor products).

Application

PN7160A1HN/C100E is an NFC controller front-end for embedded systems. Applications include:
- Reading/writing contactless cards and tags (ISO 14443/15693)
- Payment, loyalty and access-control terminals
- Transit ticketing and e-ID systems
- Secure identity/authentication in embedded devices
- NFC data exchange in IoT, wearables and smart posters

Equivalent

Direct equivalents to the NXP PN7160A1HN/C100E include NXP PN7150 and PN5180 (NFC controller/reader families), STMicroelectronics ST25R3916 / ST25R3911B (high‑performance NFC readers), Sony RC‑S series modules, and Broadcom/CSR NFC controller families. Select by required interface (I2C/SPI), HCI/firmware and secure‑element support.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria