MX25V1606FM2I03

Las imágenes son solo para referencia

MX25V1606FM2I03

IC FLASH 16MBIT SPI/DUAL 8SOP

  • Fabricante
  • Mfr. Parte #MX25V1606FM2I03
  • Paquete
  • Hoja de datos
  • En stock5075

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series MXSMIO™
Part Status Not For New Designs
Base Product Number MX25V1606
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 16Mbit
Memory Organization 2M x 8
Memory Interface SPI - Dual I/O
Clock Frequency 104 MHz
Write Cycle Time - Word, Page 75µs, 4ms
Voltage - Supply 2.3V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOP
Packaging Tube

Descripción general

Description

MX25V1606FM2I03 is Macronix’s 16‑Mbit serial NOR flash memory. It provides non-volatile storage for embedded systems and firmware, accessed via an SPI-compatible interface that supports standard, dual, and quad I/O modes for higher throughput. The device stores 16 Mbit (2 MB) of data and offers fast read, page program (256-byte page), and erase operations at sector/block levels. It includes typical protection features (write enable/disable, status register protection, block protection) plus deep power-down and wake-up support to reduce power. Operation is from a single supply (typical range around 1.8–3.6 V; check exact Vcc for this variant). It is suitable for boot memory, firmware storage, and data logging in microcontroller and embedded applications, with low-power modes for battery-powered designs. For precise voltage, timing, endurance, and command details, consult the MX25V1606FM2I03 datasheet.

Features

MX25V1606FM2I03 features (concise):
- 16 Mbit (2 MB) serial flash memory
- SPI interface with x1/x2/x4 data (standard, dual, and quad I/O modes)
- Page program: 256-byte page; random-access writes
- Read options: standard, fast reads; Quad IO read up to 104 MHz
- Erase granularity: 4 KB sectors, 32 KB blocks, 64 KB blocks, and full-chip erase
- Endurance and retention: typical ~100k P/E cycles; data retention > ~20 years
- Low-power operation with deep power-down mode
- Operating voltage: 2.7–3.6 V
- Industrial temperature range: −40°C to +85°C
- Hardware protection: WP# and HOLD# pins with sector/block protection options
(Refer to the datasheet for exact voltage/temperature specs and catalog variations.)

Package

MX25V1606FM2I03 uses an 8-pin SOIC (US8) small-outline package.

Pinout

- Pin count: 8 pins (SOP-8/8-pin package)
- Function: 16-Mbit serial SPI flash memory (MX25V1606FM2I03). Interface via CS, CLK, DI (SI), DO (SO); has power (VCC) and ground (GND) pins, plus control pins WP# (write protection) and HOLD# (hold). Useful for program/data storage with standard read/write/erase operations.

Manufacturer

- Manufacturer: Macronix International Corp., Ltd. (MXIC).
- Company type: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory products (NOR/NAND flash, ROM, etc.), i.e., an integrated device manufacturer (IDM) with its own fabrication facilities.

Application

Key application areas for MX25V1606FM2I03 (16 Mbit serial flash):
- Boot/firmware storage for microcontrollers and SoCs
- Code/data storage for embedded systems (IoT, wearables, consumer electronics)
- Firmware updates in automotive ECUs and industrial controllers
- Configuration and log storage in networking gear (routers, switches)
- External flash for set-top boxes, digital cameras, and audio/video devices
- General non-volatile storage for portable devices via SPI flash interface

Equivalent

Equivalent parts (16 Mbit, 3V SPI serial flash; similar interfaces):
- Winbond W25Q16JV / W25Q16DV
- GigaDevice GD25Q16C
- Cypress/Spansion S25FL016K
- ISSI IS25LP016D
Note: exact speed, packaging and dual/quad I/O support vary—confirm voltage, timing, and package in your BOM.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar