MX25L51245GMI-10G

Las imágenes son solo para referencia

MX25L51245GMI-10G

IC FLASH 512MBIT SPI/QUAD 16SOP

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series MXSMIO™
Part Status Not For New Designs
Base Product Number MX25L51245
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 512Mbit
Memory Organization 64M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Write Cycle Time - Word, Page 60µs, 750µs
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOP
Packaging Tube

Descripción general

Description

The MX25L51245GMI-10G is a 512Mb (64MB) serial NOR flash memory chip designed for various applications, including consumer electronics, automotive systems, and industrial equipment. It operates using a Serial Peripheral Interface (SPI) and supports dual and quad I/O modes, enhancing data transfer rates.
With a supply voltage range of 2.7V to 3.6V, the device provides flexible power options, while its fast read speeds of up to 104 MHz enable efficient data retrieval. The chip features a robust architecture with a 16KB sector erase capability, allowing for efficient memory management.
Additionally, it supports multiple functionalities, such as deep power-down mode for energy savings and an on-chip hardware protection mechanism to prevent accidental data writing. The MX25L51245GMI-10G is ideal for applications requiring high-density storage and fast access times, making it a popular choice for embedded systems and firmware storage.

Features

The MX25L51245GMI-10G is a 512Mb (64MB) flash memory chip from Macronix, designed for various applications in consumer electronics, automotive, and industrial devices. Key features include:
1. Memory Type: NOR Flash, suitable for code storage and execution.
2. Interface: SPI (Serial Peripheral Interface) with dual and quad I/O options for improved data transfer rates.
3. Access Time: Fast read performance with access times as low as 10µs.
4. Operating Voltage: 2.7V to 3.6V, accommodating a wide range of power supply options.
5. Endurance: Supports up to 100,000 program/erase cycles, ensuring durability over time.
6. Data Retention: Retains data for over 20 years at 85°C.
7. Package Options: Available in various packages like SOIC, WSON, and others, facilitating integration into different designs.
8. Security Features: Supports multiple security features, including a unique ID and write protection.
This chip is ideal for embedded applications requiring reliable, high-capacity storage solutions.

Package

The MX25L51245GMI-10G is packaged in a 8-pin WSON (Thin Small Outline No-lead) package, featuring a compact design suited for surface mounting. This package type enhances space efficiency in electronic applications.

Pinout

The MX25L51245GMI-10G is a 512 Mb (64 MB) serial NOR Flash memory chip with a total of 8 pins. The pin functions are as follows:
1. CS (Chip Select): Active low input to select the device.
2. SO (Serial Output): Data output pin for reading.
3. SI (Serial Input): Data input pin for writing.
4. SCK (Serial Clock): Clock signal for synchronizing data transmission.
5. WP (Write Protect): Active low input to protect against accidental writes.
6. HOLD: Active low input to pause serial communication.
7. VCC: Power supply pin (typically 2.7V to 3.6V).
8. GND: Ground pin.
This chip operates using the SPI (Serial Peripheral Interface) protocol and provides fast read and write capabilities, making it suitable for various applications in embedded systems.

Manufacturer

The manufacturer of the MX25L51245GMI-10G is Macronix International Co., Ltd. Macronix is a semiconductor company based in Taiwan, specializing in non-volatile memory products, including NOR Flash and NAND Flash memory. Established in 1989, Macronix develops a range of memory solutions for various applications, including consumer electronics, automotive, industrial, and communications. The company is known for its focus on quality, innovation, and customer service in the semiconductor industry.

Application

The MX25L51245GMI-10G is a serial NOR Flash memory chip commonly used in embedded systems for applications such as consumer electronics, automotive, industrial control, IoT devices, and telecommunications. It serves as firmware storage, code execution memory, and data retention in applications requiring fast read speeds and reliable performance. Its compact form factor and SPI interface make it suitable for space-constrained designs.

Equivalent

The MX25L51245GMI-10G is a 512Mb SPI Flash memory chip. Equivalent products include the Winbond W25Q512JV, Micron MT25QL512ABA, and Spansion S25FL512S. These alternatives provide similar specifications in terms of density, interface, and performance, making them suitable substitutes in applications requiring SPI Flash memory. Always ensure compatibility with the specific application requirements before substitution.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria