MX25L1006EZUI-10G

Las imágenes son solo para referencia

MX25L1006EZUI-10G

IC FLASH 1MBIT SPI 104MHZ 8USON

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series MX25xxx05/06/08
Part Status Not For New Designs
Base Product Number MX25L1006
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 1Mbit
Memory Organization 128K x 8
Memory Interface SPI
Clock Frequency 104 MHz
Write Cycle Time - Word, Page 50µs, 3ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-UFDFN Exposed Pad
Supplier Device Package 8-USON (2x3)
Packaging Cut Tape (CT), Tape & Reel (TR)

Descripción general

Description

MX25L1006EZUI-10G is Macronix’s 1-Mbit SPI NOR flash memory in an 8-pin package (MX25L family). It provides nonvolatile storage for embedded firmware and data, used for boot code or code/data storage in microcontroller-based systems.
Key features (high level):
- Interface: Serial SPI with standard read/write/erase commands; some variants support faster dual/quad I/O reads.
- Capacity and organization: 1 Mbit total, typically organized as 128 K × 8.
- Memory operations: page programming, sector/block erases, and chip erase; low-power standby modes.
- Packaging/grade: the -10G suffix identifies the exact package, temperature range, and performance option for this device; exact specs vary by variant.
Typical electricals (per datasheet): voltage commonly ranges around 2.7–3.6 V; timing and maximum clock frequency depend on the specific revision. For exact timings, voltage, package pinout, and feature details, consult the Macronix MX25L1006EZUI-10G datasheet and packaging matrix.

Features

Here are the typical features of the MX25L1006EZUI-10G (Macronix):
- Density: 1 Mbit (128 KB) serial NOR flash
- Interface: SPI serial interface (standard SPI; fast read)
- Voltage: 2.7–3.6 V (industrial-grade variant)
- Speed: Up to ~104 MHz SPI clock for fast read
- Organization: 256-byte page size
- Erase/Program: 4 KB sectors; page-program capability
- Endurance/Retention: ~100k erase/program cycles; data retention ~20 years
- Security: hardware write protection with BP bits and WP#; status register with WIP bit
- Power modes: deep power-down and low active current modes
- Temperature: industrial range typically -40°C to +85°C
- Package: 8-pin package (e.g., SOIC/US8) suitable for low-pin-count designs
Note: exact timing, sector layout, and advanced I/O modes can vary by specific lot/variant; check the datasheet for precise specifications.

Package

8-pin USON package (3×3 mm, leadless).

Pinout

- Pin count: 8 pins
- Function: Macronix MX25L1006EZUI-10G is a serial SPI NOR flash memory (1 Mbit) used for storage. Typical pinout (8-pin package):
- CS# — Chip Select (active low)
- SO — Serial Data Out
- WP# — Write Protect (active low)
- GND — Ground
- SI — Serial Data In
- SCK — Serial Clock
- HOLD# — Hold (active low)
- VCC — Power Supply
Notes: WP#, HOLD# are active-low; VCC and GND provide power. It uses standard SPI modes for read/write operations.

Manufacturer

- Manufacturer: Macronix International Co., Ltd. (MXIC).
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs (serial NOR/NAND flash, ROM, etc.) and operates as an integrated device manufacturer (own fabrication facilities).

Application

MX25L1006EZUI-10G is a 1‑Mbit SPI flash. Typical applications:
- Boot ROM and firmware storage for MCUs/SoCs
- Nonvolatile storage for firmware updates, configuration and calibration data
- Code/data storage in small consumer electronics (printers, set‑top boxes, routers)
- Industrial/automotive sensors and controllers needing reliable flash
- IoT devices, wearables and embedded instruments requiring compact, low‑voltage nonvolatile memory

Equivalent

Possible drop-in equivalents (1 Mbyte, 3V SPI NOR, similar JEDEC family):
- Winbond W25Q10BV / W25Q10BVSIG
- GigaDevice GD25Q10C
- Puya P25Q10U
- EtronTech EN25Q10
Note: verify package, voltage (2.7–3.6 V) and max read speed to ensure full compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar