MT29F2G16ABBEAH4-AAT:E

Las imágenes son solo para referencia

MT29F2G16ABBEAH4-AAT:E

IC FLASH 2GBIT PARALLEL 63VFBGA

  • Fabricante
  • Mfr. Parte #MT29F2G16ABBEAH4-AAT:E
  • Paquete 63-VFBGA
  • Hoja de datos
  • En stock3386

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Micron Technology Inc.
Package Tray
Series Automotive, AEC-Q100
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NAND
MemorySize 2Gb (128M x 16)
MemoryInterface Parallel
Voltage-Supply 1.7V ~ 1.95V
OperatingTemperature -40°C ~ 105°C (TA)
MountingType Surface Mount
Package/Case 63-VFBGA

Descripción general

Description

MT29F2G16ABBEAH4-AAT:E? is a Micron NAND flash memory device. It belongs to the MT29F2G16ABBEAH4 family and is a non-volatile storage chip used in embedded systems and SSDs.
Key points:
- Capacity and width: 2 Gbit total capacity with a 16-bit (x16) data interface.
- Technology and organization: NAND flash (MLC) with page/block architecture and ECC requirements; ONFI-compatible interface.
- Package/grade: suffixes like -AAT indicate temperature grade and packaging variants; -E and similar endings denote additional options. Exact specs vary by revision, so check the specific datasheet for this exact suffix.
- Typical use: primary storage in embedded devices, microcontroller-based systems, or as part of larger NAND-based storage solutions.
- Important considerations: wear on erase cycles, need for wear leveling and ECC, and proper controller support to issue commands, manage bad block replacement, and perform refresh/maintenance.
For precise electrical characteristics, page size, block size, timing, endurance, and temperature range, refer to the Micron MT29F2G16ABBEAH4-AAT:E data sheet and the module/package variant documentation.

Features

Here are the key features of MT29F2G16ABBEAH4-AAT:E:
- Density: 2 Gb (256 MB) NAND Flash
- Interface: x16 I/O, ONFI-compliant
- Page/Spare: 2 KB page size with 64 B spare per page
- Organization: multi-plane capable
- Operations: supports random read/write, cache program/read
- ECC: built-in BCH ECC for data integrity
- Endurance: typical around 100,000 program/erase cycles
- Data retention: ~10 years
- Voltage: 3.3V nominal supply
- Temperature: extended operating range, typically -40°C to 85°C
- Package: standard Micron NAND package format (surface-mount)
Note: exact ONFI version and plane count may vary by revision.

Package

FBGA (Fine-pitch Ball Grid Array) package.

Pinout

- Pin count: 60 pins (FBGA60 package)
- Function: 2 Gbit NAND flash memory with a 16-bit data bus (x16). It is a parallel NAND flash device used for non-volatile storage, with standard NAND interface signals (CLE, ALE, WE#, RE#, CE#, WP#, R/B#), DQ0–DQ15, address lines, VCC, and VSS.

Manufacturer

- Manufacturer: Micron Technology, Inc.
- What kind of company: An American multinational semiconductor company that designs and manufactures memory and storage technologies (DRAM, NAND/NOR flash, SSDs) and related memory solutions.

Application

MT29F2G16ABBEAH4-AAT:E is a NAND flash memory device. Common application areas:
- Embedded storage for mobile devices, cameras/camcorders
- Boot/firmware storage for microcontrollers/SoCs
- Solid-state drives and removable storage (USB/SD)
- Automotive/industrial electronics (infotainment, ECUs, data logging)
- Networking equipment and set-top boxes
- Any system needing compact, reliable non-volatile storage.

Equivalent

MT29F2G16ABBEAH4-AAT:E is a Micron 2‑Gbit NAND Flash, x16 I/O, 1.8V, extended‑temperature. Direct equivalents are only other devices in the MT29F2G16ABBEAH4 family. There are no published exact cross‑vendor substitutes; use Micron’s Cross‑Reference Tool for precise substitutions. Closest non‑Micron options are other 2Gbit ×16 NANDs from Samsung/Hynix/Winbond, but pinout, timing, and voltage may differ and require verification.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria