MPC8347VVALFB

Las imágenes son solo para referencia

MPC8347VVALFB

IC MPU MPC83XX 667MHZ 672TBGA

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier NXP USA Inc.
Package Tray
Series MPC83xx
ProductStatus Obsolete
CoreProcessor PowerPC e300
NumberofCores/BusWidth 1 Core, 32-Bit
Speed 667MHz
RAMControllers DDR
GraphicsAcceleration No
Ethernet 10/100/1000Mbps (2)
USB USB 2.0 + PHY (2)
Voltage-I/O 2.5V, 3.3V
OperatingTemperature 0°C ~ 105°C (TA)
Package/Case 672-LBGA

Descripción general

Description

Introduction to MPC8347VVALFB
- What it is: A Freescale/NXP PowerQUICC II Pro single-chip embedded processor in the MPC83xx family, widely used in networking gear (routers, switches, gateways).
- Core: PowerPC-based e300 32-bit CPU core, designed for high-throughput embedded tasks with on-chip caches.
- Peripherals: dual Ethernet MACs (10/100/1000 Mbps), PCI/PCI-X, USB, multiple serial interfaces, on-chip DMA, timers, and memory controllers.
- Memory/I/O: integrated memory controller for DDR SDRAM/Flash and high-speed buses to off-chip memory and peripherals; cryptography/security engine in many configurations.
- Packaging/variant: VVALFB denotes a specific package/temperature/lead-free variant (industrial/extended temperature options vary by part).
- Use cases: suitable for embedded networking equipment, telecom appliances, and edge devices; widely supported by Linux, VxWorks, and Freescale/NXP BSPs.
If you need exact specs (MHz, memory sizes, number of MACs), please specify the datasheet revision or your board variant.

Features

MPC8347VVALFB — key features (PowerQUICC III Pro, 32-bit PowerPC e300 core)
- 32-bit PowerPC e300 core (high-performance in-order Power Architecture) suitable for embedded routing/switching.
- On-chip Communications Processor Module (CPM) with multiple Ethernet MACs and packet-switching support for fast network traffic handling.
- DDR2 SDRAM memory controller with ECC support (robust memory options for embedded systems).
- Rich peripheral set: USB 2.0, I2C, SPI, UARTs, GPIO, plus multiple serial interfaces and timers.
- Networking accelerators: support for jumbo frames, traffic management, and PHY interfaces.
- Security/crypto engine (DES/3DES/AES) for hardware-accelerated encryption.
- DMA/EDMA engine for high-throughput data movement.
- Real-time clock and watchdog with extensive timing resources.
- Debug/trace: JTAG and on-chip trace capabilities.
- Packaging: industrial temperature range (-40 to 85 C) in a lead-free VVALFB package.
Typical用途: telecom/industrial routers, switches, and other networked embedded applications.

Package

MPC8347VVALFB uses an LFBGA package (Lead-Free Fine-Pitch Ball Grid Array).

Pinout

Pin count: 784 pins (FBGA package).
Function: Freescale/NXP MPC8347VVALFB is a PowerQUICC III network processor/SoC. It integrates a PowerPC-based core with multiple high-speed interfaces (e.g., Ethernet MACs, PCI-X/PCIe, memory controllers and other I/O) for embedded networking applications.

Manufacturer

- Manufacturer: Freescale Semiconductor (now part of NXP Semiconductors).
- Company type: A semiconductor company that designs and manufactures embedded processors, microcontrollers, and related silicon for automotive, networking, industrial, and consumer applications.

Application

- Edge routers and switches
- Gateway platforms (CPE, DSLAM/access equipment)
- VPN, firewall, and IDS/IPS appliances
- Carrier-grade infrastructure (BRAS/MPLS, aggregation)
- Industrial and IoT edge gateways requiring robust packet processing, QoS, and security

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar