MP5017GD-Z

Las imágenes son solo para referencia

MP5017GD-Z

IC PWR SWITCH N-CHAN 1:1 12QFN

  • Fabricante
  • Mfr. Parte #MP5017GD-Z
  • Paquete QFN-12
  • Hoja de datos
  • En stock7914

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR)
ProductStatus Not For New Designs
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType N-Channel
Interface On/Off
Voltage-Load 3V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 5A
RdsOn(Typ) 45mOhm
Features Slew Rate Controlled, Status Flag
FaultProtection Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 12-QFN (2x3)

Descripción general

Description

MP5017GD-Z is a Monolithic Power Systems DC-DC buck regulator IC. It’s a synchronous, fixed‑frequency step‑down converter with integrated high‑ and low‑side MOSFETs, designed to convert a higher input voltage to a regulated lower output with high efficiency. It uses PWM control, includes soft-start, enable, and protection features (overcurrent, thermal, undervoltage/overvoltage as applicable). The “GD‑Z” suffix indicates RoHS/green packaging with tape‑and‑reel options. Typical uses include power management for CPUs/FPGA/SoCs, memory rails, automotive electronics, LED drivers, and other compact, efficient DC‑DC supplies. For exact input voltage range, output voltage options, current capability, switching frequency, and external components, consult the MP5017GD‑Z datasheet and reference designs.

Features

Key features of MP5017GD-Z (concise):
- Wide input range: supports 4.5V to 42V
- Synchronous buck regulator with integrated high-side/low-side MOSFETs
- High efficiency (up to about 95% in typical apps)
- Current-mode control with fast transient response
- Soft-start to prevent inrush and output overshoot
- Adjustable output via feedback network
- Enable/shutdown control pin
- Comprehensive protection: overcurrent/short-circuit, overvoltage (OVP), thermal shutdown (TSD/OTP), undervoltage lockout (UVLO)
- Suitable for automotive/industrial environments; accurate regulation over temp
- Small, lead-free package (GD-Z variant) for compact designs
Note: exact switching frequency and additional features may vary by package/variant; consult the datasheet for precise specs.

Package

MP5017GD-Z is in a lead-free QFN package, 20 pins, about 4×6 mm (RoHS-compliant).

Pinout

MP5017GD-Z is a Monolithic Power Systems 16-pin, QFN-format synchronous buck regulator. It includes integrated high‑ and low‑side MOSFETs and uses an inductor and feedback network to generate a regulated output from VIN.
Typical pin functions (16 pins total):
- VIN: input supply
- GND: ground
- SW: switch node to inductor
- BST: bootstrap for high‑side gate drive
- EN: enable
- FB: feedback for regulating VOUT
- ILIM: current-limit adjustment
- RUN/SS: soft-start/run control
- PGOOD: power‑good status
- VCC or bias pin: device bias supply
- COMP: external compensation
- NC: no connect (unused pins)
Note: exact pin-to-pin mapping can vary by package variant; consult the specific datasheet for the MP5017GD-Z you’re using to confirm the exact pinout.

Manufacturer

- Manufacturer: Monolithic Power Systems, Inc. (MPS).
- What kind of company: A fabless semiconductor company that designs and markets high-performance power management ICs, including DC-DC converters and other analog/mixed-signal devices.

Application

MP5017GD-Z is a high-efficiency synchronous buck regulator for DC-DC power conversion. Common application areas include:
- Portable/consumer electronics power supplies
- VRMs for notebooks and embedded systems
- Small form-factor adapters and auxiliary rails
- Automotive and industrial power management
- Battery-powered devices requiring efficient, compact step-down conversion

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar