MP3398AGS-Z

Las imágenes son solo para referencia

MP3398AGS-Z

IC LED DRV CTRL PWM 350MA 16SOIC

  • Fabricante
  • Mfr. Parte #MP3398AGS-Z
  • Paquete SOIC-16
  • Hoja de datos
  • En stock6199

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR)
ProductStatus Active
Type DC DC Controller
Topology Step-Up (Boost)
InternalSwitch(s) No
NumberofOutputs 4
Voltage-Supply(Min) 5V
Voltage-Supply(Max) 28V
Current-Output/Channel 350mA
Frequency 540kHz
Dimming Analog, PWM
Applications Backlight
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 16-SOIC (0.154, 3.90mm Width)

Descripción general

Description

MP3398AGS-Z is a high-performance motor-driver IC from Monolithic Power Systems (MPS) designed to drive brushless DC motors and stepper motors with integrated power MOSFETs. It provides efficient, compact motor control with minimal external components.
Key points
- Integrated power bridge: N-channel MOSFETs for smooth, high-current motor drive
- Adjustable current limit via sense resistor
- Protection: undervoltage lockout, overcurrent, overtemperature/overvoltage
- Supports motor-drive features such as microstepping/decay options for smooth motion
- Suitable for compact, low-footprint applications
Packaging
- AGS-Z denotes a RoHS-compliant, compact QFN-style package variant with specific lead/frame options (check datasheet for exact pinout and packaging details)
Typical applications
- Robotics, printers, CNC/automation, and other precision motor-control tasks
Note
- For exact electrical specs (voltage range, peak/current ratings) and pinout, refer to the MP3398AGS-Z datasheet and product brief.

Features

Key features of MP3398AGS-Z (summary):
- 3-phase brushless DC motor driver with integrated MOSFETs
- Wide supply range (approximately 4.5–28 V)
- Programmable peak current with accurate current regulation
- PWM control with selectable decay modes; supports smooth sine/six-step commutation
- Sensorless commutation using back-EMF detection for startup and run
- Built-in protection: overcurrent, overvoltage, undervoltage, overtemperature; short-circuit protection
- Fault diagnostics and status outputs for monitoring
- Enable (EN) and DIR/PWM-style control interface for direction and speed
- Compact AGS-Z package (QFN-style) with good thermal performance
Note: For exact electrical specs, pinout, and programming registers, refer to the MP3398AGS-Z datasheet.

Package

QFN package (QFN-20, approx. 4x4 mm) with an exposed pad.

Pinout

- Pin count: 28 pins (QFN-28, MP3398AGS-Z).
- Function: 3‑phase brushless DC motor driver with six integrated MOSFETs (three half-bridges) to directly drive a BLDC motor, including current sensing and protection features (overcurrent/UVLO/thermal), with logic inputs to control motor commutation.

Manufacturer

- Manufacturer: Monolithic Power Systems (MPS).
- Company type: An American semiconductor company that designs and manufactures analog and mixed-signal ICs, specializing in power-management and motor-control devices.

Application

MP3398AGS-Z is a high-performance MEMS gyroscope (3-axis) used for precise angular rate sensing. Typical application areas:
- Drones/UAV attitude and stabilization
- Robotics and autonomous systems for motion sensing and pose estimation
- Automotive safety and ADAS sensor fusion
- Consumer electronics, AR/VR, motion controllers
- Camera stabilization and gimbals
- Inertial navigation and dead-reckoning systems
- Industrial vibration monitoring and remote sensing

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar