MP23AB02BTR

Las imágenes son solo para referencia

MP23AB02BTR

MIC MEMS ANALOG OMNI -38DB

  • Fabricante
  • Mfr. Parte #MP23AB02BTR
  • Paquete
  • Hoja de datos
  • En stock17558

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Obsolete
Base Product Number MP23
Type MEMS (Silicon)
Output Type Analog
Direction Omnidirectional
Frequency Range 20 Hz ~ 20 kHz
Sensitivity -38dB ±3dB @ 94dB SPL
S/N Ratio 64dB
Voltage - Rated 1.8 V
Current - Supply 220 µA
Port Location Bottom
Termination Solder Pads
Size / Dimension 0.132" L x 0.098" W (3.35mm x 2.50mm)
Height (Max) 0.043" (1.08mm)
Shape Rectangular
Packaging Tape & Reel (TR)
Voltage Range 1.6 V ~ 3.6 V

Descripción general

Description

MP23AB02BTR is a small, non-volatile serial memory device: a 2-kilobit I2C EEPROM (256 x 8) in an 8-pin package, with a Tape & Reel (TR) variant for manufacturing.
Key points:
- Capacity: 2 Kb total (256 x 8 bytes)
- Interface: I2C two-wire (SDA/SCL); standard/fast modes typically supported
- Addressing: I2C address selected via hardware pins per device family (consult datasheet)
- Features: random read, page write (commonly 8-byte pages), automatic internal addressing
- Endurance/Speed: typical write cycle around a few milliseconds; endurance about 1 million write/erase cycles
- Voltage: operates from a modest supply voltage (variant-dependent, often 1.8–5.5 V)
- Package: 8-pin small-outline; TR suffix indicates Tape & Reel packaging for automated assembly
- Applications: storing small data like calibration constants, configuration data, device IDs in microcontroller-powered systems
For exact pinout, timing diagrams, voltage ranges, and ordering information, refer to the supplier’s datasheet.

Features

Here are the likely key features of MP23AB02BTR (MEMS microphone, bottom-port, analog output):
- MEMS microphone with bottom-port
- Analog output
- Omnidirectional pickup
- SNR typical around 63–65 dB
- Supply voltage ~1.8–3.6 V (common operation around 2.0–3.3 V)
- Low power consumption (typical active current under 1 mA)
- Package: small LGA (about 2.0 × 3.0 mm)
- Tape & Reel (TR) packaging
- Operating temperature range roughly -25 to 85°C
Note: exact numbers vary by lot and revision; consult the datasheet for precise specifications.

Package

It’s the 8‑pin SOP package with Tape‑and‑Reel (TR) packaging.

Pinout

MP23AB02BTR is a 4-pad MEMS digital (PDM) microphone. Typical pin functions:
- VDD — power supply (1.6–3.6 V)
- GND — ground
- CLK (CLKIN) — PDM clock input
- DATA (DOUT) — PDM data output
(Exact pad numbering and mechanical footprint vary by package—refer to the official datasheet for the pad numbering and recommended PCB footprint.)

Manufacturer

Manufacturer: STMicroelectronics (the part MP23AB02BTR).
Type of company: STMicroelectronics is a global semiconductor manufacturer (multinational integrated device manufacturer) that designs and makes MEMS microphones, sensors, analog/digital ICs and other semiconductor devices.

Application

MP23AB02BTR is a 2‑Mbit I2C serial EEPROM. Applications: firmware/configuration storage, calibration data, and non-volatile logs for microcontroller-based devices; suitable for consumer electronics, wearables, automotive, industrial control, IoT gateways, smart meters, medical devices, and data-logging systems.

Equivalent

Common equivalents (analog, omnidirectional, bottom‑port MEMS microphones) include:
- Analog Devices ADMP401
- Knowles SPU0410 series
- CUI Devices / TDK analog MEMS microphone variants
Always verify sensitivity, SNR, supply voltage, package/pinout and mechanical porting against the MP23AB02BTR datasheet before substituting.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar