MOCD207M

Las imágenes son solo para referencia

MOCD207M

OPTOISO 2.5KV 2CH TRANS 8-SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
Number of Channels 2
Voltage - Isolation 2500Vrms
Current Transfer Ratio (Min) 100% @ 10mA
Current Transfer Ratio (Max) 200% @ 10mA
Turn On / Turn Off Time (Typ) 7.5µs, 5.7µs
Rise / Fall Time (Typ) 3.2µs, 4.7µs
Input Type DC
Output Type Transistor
Voltage - Output (Max) 70V
Current - Output / Channel 150mA
Voltage - Forward (Vf) (Typ) 1.25V
Current - DC Forward (If) (Max) 60 mA
Vce Saturation (Max) 400mV
Operating Temperature -40°C ~ 100°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC
Base Product Number MOCD207

Descripción general

Description

MOCD207M is an optocoupler, specifically designed for high-speed signal isolation in electronic circuits. It features a phototransistor output that allows for efficient electrical isolation between the input and output, enabling safe data transmission across different voltage domains. The device typically includes a gallium arsenide infrared LED, which emits light when current flows through it, and a phototransistor that detects this light, turning it into a corresponding output signal.
Key characteristics of MOCD207M include its fast switching speeds, high isolation voltage (typically around 5,000 V), and a wide operating temperature range. This makes it suitable for various applications, such as in power supplies, signal conditioning, and digital communication systems, where preventing electrical noise and ensuring safety are critical. Additionally, the compact packaging makes it easy to integrate into diverse circuit designs.

Features

The MOCD207M is an optocoupler designed for high-speed data communication and isolation between circuits. Key features include:
1. High Isolation Voltage: Provides up to 5 kVrms isolation, ensuring safe operation in high-voltage applications.
2. High-Speed Switching: Capable of operating at speeds up to 10 Mbps, making it suitable for fast data transmission.
3. Dual Channel: Contains two optically isolated channels in a single package, allowing for compact designs and efficient use of board space.
4. Low Input Current: Requires minimal input current for activation, enhancing energy efficiency.
5. Wide Temperature Range: Operates effectively in a broad temperature range, typically from -40°C to +100°C.
6. Compact Package: Available in a small DIP (Dual In-line Package), facilitating easy integration into various electronic designs.
These attributes make the MOCD207M ideal for applications in telecommunications, industrial automation, and consumer electronics where isolation, speed, and space-saving designs are critical.

Package

The MOCD207M is typically packaged in a 6-pin dual in-line package (DIP) format. It is an opto-isolator (opto-coupler) designed for signal isolation and transfer in electronic circuits.

Pinout

The MOCD207M is an optocoupler with a total of 6 pins. Its primary function is to provide electrical isolation between its input and output while enabling signal transfer. The pin configuration is as follows:
1. Anode (A) - Input pin for the LED.
2. Cathode (K) - Input pin for the LED (connected to ground).
3. Collector (C) - Output pin connected to the phototransistor's collector.
4. Emitter (E) - Output pin connected to the phototransistor's emitter.
5. NC (Not Connected) - No internal connection.
6. NC (Not Connected) - No internal connection.
The MOCD207M is designed for applications where isolation and signal transfer are essential, such as in power supply circuits, data communication, and microcontroller interfaces. It offers a maximum voltage isolation of 5,000 Vrms and supports various input and output configurations.

Manufacturer

The MOCD207M is manufactured by MOC (Mitsubishi Electric Corporation). Mitsubishi Electric is a diversified multinational company based in Japan, primarily focusing on electrical and electronic equipment. Established in 1921, it operates in various sectors, including industrial automation, automotive equipment, power systems, and consumer electronics. The company is known for its innovation and commitment to advanced technology solutions. The MOCD207M itself is an optocoupler, which is a component used to transmit signals while isolating different parts of a system to prevent interference and enhance safety. Mitsubishi Electric is recognized for its emphasis on quality and sustainability in its manufacturing processes.

Application

The MOCD207M is an optocoupler commonly used in applications such as isolation in communication interfaces, signal transmission in power electronics, and protection in microcontroller circuits. It's suitable for use in industrial automation, automotive systems, and consumer electronics to ensure safety and prevent voltage spikes from affecting sensitive components.

Equivalent

The MOCD207M optocoupler is equivalent to several other optocouplers, including the MOC3063, MOC3021, and MOC3020. Additionally, the PC814 and TLP-521 can serve similar functions in various applications. Always verify specifications like voltage, current ratings, and package types for compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar