MAX811REUS+T

Las imágenes son solo para referencia

MAX811REUS+T

IC SUPERVISOR 1 CHANNEL SOT143-4

  • Fabricante
  • Mfr. Parte #MAX811REUS+T
  • Paquete SOT-143-4
  • Hoja de datos
  • En stock6708

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Bulk
ProductStatus Obsolete
Type Simple Reset/Power-On Reset
NumberofVoltagesMonitored 1
Voltage-Threshold 2.63V
Output Push-Pull, Totem Pole
Reset Active Low
ResetTimeout 140ms Minimum
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case TO-253-4, TO-253AA

Descripción general

Description

MAX811REUS+T is Maxim’s MAX811 family voltage supervisor with optional watchdog/reset features. It monitors the supply rail and provides a controlled reset signal to a microcontroller or digital logic to avoid bad operation during power-up, brownouts, or fault conditions. Key ideas:
- Generates a clean, active-low RESET# output when Vcc is too low or a watchdog timeout occurs.
- Includes optional inputs for manual reset (MR) and watchdog (WDI) to extend or force a reset as needed.
- Provides a defined power-on reset delay so the MCU starts only after Vcc stabilizes.
- Flexible operation across typical MCU voltages (variants cover roughly 2.7–5.5 V; exact thresholds depend on the specific part).
- REUS+T suffix indicates packaging/ordering options (RoHS-compliant), with +T often denoting Tape & Reel packaging.
Common uses: MCU/systems reset protection, safe startup in embedded systems, battery-powered devices, and any design needing guaranteed reset behavior on power or watchdog events.
If you need exact electrical specs (thresholds, delay times, pinout) for your exact variant, I can pull the datasheet details.

Features

Here are the key features of MAX811REUS+T (Microprocessor supervisory with watchdog):
- POWER-ON RESET and undervoltage monitoring to ensure a safe MCU start
- Independent watchdog timer with external capacitor to set timeout
- WDI input to refresh/kick the watchdog; if not refreshed, reset is generated
- Manual reset input to force an immediate reset
- RESET output (active-low, RESET#) to drive the MCU/reset circuitry
- Wide supply range (approx. 2.7 V to 5.5 V) with low quiescent current
- Small RoHS-compliant package (REUS, tape-and-reel) for surface-mount designs
- Designed for standard industrial temperature range (typical -40°C to +85°C)
Note: The exact voltage-threshold options, timing ranges, and output characteristics depend on the specific MAX811 variant family; consult the datasheet for MAX811REUS+T for precise numbers.

Package

MAX811REUS+T is in an 8-pin surface-mount package (SOIC/SOP-8) with Tape-and-Reel packaging.

Pinout

Pin count: 8 pins (SOIC-8, D8).
Function: MAX811REUS+T is a microprocessor reset supervisor. It monitors Vcc and generates a reset signal to a microcontroller during power-up/power-down to ensure proper reset. It also provides an external manual/reset input to force a reset. No external components are required for typical use. The suffix indicates RoHS-compliant (REUS) packaging and tape-and-reel (T).

Manufacturer

Manufacturer: Maxim Integrated Products (now a subsidiary of Analog Devices, Inc.).
What kind of company: A global semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits.

Application

Application areas of MAX811REUS+T:
- Microcontroller/microprocessor reset supervision (power-on reset with brown-out protection)
- Deterministic reset release for embedded systems, digital logic, FPGA/CPLD
- Battery-powered/portable devices needing a reliable, low-quiescent-reset solution
- Systems requiring clean reset during power cycles or supply dips (consumer electronics, industrial control, communications equipment)

Equivalent

Equivalent parts (voltage supervisors with reset/POR) to MAX811REUS+T include:
- TI TLV803/TLV803B
- Microchip MCP1314/MCP1315/MCP1316
- Onsemi NCP301/NCP302/NCP303
- Analog Devices ADM803/ADM804
These devices provide similar supervisor/reset functionality; pick by supply threshold and reset delay to match MAX811’s specs.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria