MAX485CPA

Las imágenes son solo para referencia

MAX485CPA

IC TRANSCEIVER HALF 1/1 8PDIP

  • Fabricante
  • Mfr. Parte #MAX485CPA
  • Paquete
  • Hoja de datos
  • En stock2837

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Obsolete
Type Transceiver
Protocol RS422, RS485
Number of Drivers/Receivers 1/1
Duplex Half
Receiver Hysteresis 70 mV
Data Rate 2.5Mbps
Voltage - Supply 4.75V ~ 5.25V
Operating Temperature 0°C ~ 70°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP
Base Product Number MAX485

Descripción general

Description

MAX485CPA is Maxim Integrated’s low‑power RS‑485/RS‑422 transceiver. It provides half‑duplex differential serial communication for multi‑node networks (useful in industrial automation, building automation, etc.).
Key points:
- 5V single‑supply operation with low power consumption.
- Data rate up to about 2.5 Mbps (RS‑485 compatible).
- A/B pins drive the differential bus; DI is MCU transmit, RO is MCU receive.
- DE (driver enable) and RE (receiver enable) control transmission and reception.
- Receiver features a failsafe output (RO goes high when the bus is idle/open/shorted).
- Available in small 8‑pin packages (DIP/SOIC), with 1/8‑unit‑load on the bus for many nodes.
Typical use: connect a microcontroller to a twisted‑pair RS‑485 network for reliable, multi‑point communication. Keep in mind DE/RE control timing to avoid bus conflicts.

Features

MAX485CPA features (concise):
- 5V single-supply operation
- Half-duplex RS-485/RS-422 transceiver
- Data rate up to 2.5 Mbps
- 1/8-unit-load receiver (enables many nodes on a single bus)
- Separate DE and /RE controls for direction and enable
- Tri-state outputs for bus sharing
- Failsafe receiver output (RO) stays high when inputs are open, idle, or shorted
- Low-power CMOS design; suitable for battery/low-power apps
- Industrial temperature range (typical options in variant family)
- Available in compact 8-pin packages (e.g., DIP/SOIC)
Note: For exact electrical numbers and package options, consult the MAX485CPA datasheet.

Package

MAX485CPA comes in an 8-pin Plastic DIP (PDIP) package.

Pinout

- Pin count: 8 pins
- Function: Low-power, half‑duplex RS-485/RS-422 transceiver (driver and receiver). DI feeds the driver, RO is the receiver output, DE enables the driver, RE enables the receiver, with A and B as the differential bus pins, plus VCC and GND.
- Typical pinout: 1 RO, 2 RE (active low), 3 DE, 4 DI, 5 GND, 6 A, 7 B, 8 VCC.

Manufacturer

- Manufacturer: Maxim Integrated (the MAX485CPA product line; now part of Analog Devices after the acquisition in 2021).
- What kind of company: A semiconductor company that designs and markets analog and mixed-signal integrated circuits (e.g., RS-485 transceivers).

Application

MAX485CPA is a low‑power, 5V, half‑duplex RS‑485/RS‑422 transceiver. Typical applications:
- Industrial automation and PLC networks (multi‑point RS‑485)
- Building automation, smart meters, HVAC, energy monitoring
- Remote telemetry and SCADA
- Data acquisition and distributed sensor networks
- Networked instrumentation and serial links in noisy environments
(Uses: long‑distance, multi‑point serial communication with noise immunity.)

Equivalent

Equivalent RS-485 half‑duplex transceivers to MAX485CPA include:
- Analog Devices: ADM485
- Texas Instruments: SN65HVD178 (and SN65HVD75 family)
- Exar/MaxLinear: SP3482, SP3485
- Intersil/Renesas: ISL8480, ISL8482
Notes: these are functionally similar (5V RS‑485, half‑duplex), but pinouts and timing vary. Check data sheets for voltage, speed, and package compatibility before cross‑replacing.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar