LTC4263CDE-1#PBF

Las imágenes son solo para referencia

LTC4263CDE-1#PBF

IC POE CNTRL 1 CHANNEL 14DFN

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tube
ProductStatus Active
Type Controller (PSE)
NumberofChannels 1
Power-Max 30 W
InternalSwitch(s) Yes
AuxiliarySense No
Standards 802.3af (PoE)
Voltage-Supply 33V ~ 66V
Current-Supply 2mA
OperatingTemperature 0°C ~ 70°C
MountingType Surface Mount
Package/Case 14-WFDFN Exposed Pad

Descripción general

Description

LTC4263CDE-1#PBF is Analog Devices’ IEEE 802.3af/at PoE PD controller. It provides the PoE-powered-device (PD) interface—handling detection, classification, and power-path control—and feeds a downstream DC–DC converter with a protected high-side path. The device accepts the PoE input (up to the typical PSE rail voltages used by PoE, e.g., up to ~57 V), offers current limiting and fault protection, and is designed to simplify PoE PD designs with integrated power-path control and protections (OC/UV/OT, thermal, etc.). The "CDE-1" suffix denotes a specific Pb-free, RoHS-compliant package variant, while "#PBF" confirms Pb-free packaging. This part is commonly used in PoE-powered devices such as IP cameras, VoIP phones, wireless access points, and other networked endpoints.
Note: For exact pinout, electrical characteristics, timing, and recommended application circuits, consult the LTC4263 datasheet and product page.

Features

Here are the typical features of the LTC4263CDE-1#PBF family (hot-swap/power-path controller):
- Hot-swap controller with integrated high-side switch for power-path control
- Inrush/current-limit protection with soft-start
- Programmable current limit for protection against short-circuits
- Reverse-current protection and load-disconnect behavior
- Overvoltage and undervoltage protection on the input/output
- Thermal protection/shutdown
- Overcurrent protection with fault latch and auto-retry behavior
- Enable/disable control and automatic recovery
- Fault/status signaling outputs (fault and status indicators)
- Wide input voltage range suitable for automotive/industrial applications
- Low quiescent current in steady state
- Pb-free package (CDE-1 variant, PBF)
Note: For exact electrical specs (limits, timing, pinout), refer to the LTC4263CDE-1#PBF datasheet.

Package

8‑lead MSOP (Mini Small Outline Package), 3x3 mm, plastic. PBF indicates RoHS-compliant, lead-free.

Pinout

- Pin count: 16 pins
- Function: LTC4263CDE-1#PBF is a hot‑swap controller with high‑side MOSFET drive, providing current‑limit and soft‑start/inrush control plus protection (overcurrent/short‑circuit, undervoltage/overvoltage) to protect a board when plugged into a live backplane. It drives an external N‑MOSFET and offers fault indication.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI). The LTC4263CDE-1#PBF is a Linear Technology part that is now sold under Analog Devices after their acquisition of Linear Technology.
- What kind of company: Analog Devices is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits, including power management and signal-conditioning devices.

Application

- PoE PD front-end controller for IEEE 802.3af/at
- PoE-powered devices: IP cameras, VoIP phones, wireless access points
- Remote sensors and industrial IoT equipment
- LED lighting and signage powered over Ethernet
- PoE-enabled point-of-sale terminals and similar distributed equipment

Equivalent

Direct one-to-one equivalents for LTC4263CDE-1#PBF do not exist. It’s a PoE PD controller (IEEE 802.3af/at). Closest functional substitutes from other vendors include TI TPS2375/TPS2373 family. For an exact cross-reference by package/pinout, use distributor tools (Digi-Key/Mouser) or contact Analog Devices support.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar