LT1976IFE

Las imágenes son solo para referencia

LT1976IFE

IC REG BUCK ADJ 1.5A 16TSSOP

  • Fabricante
  • Mfr. Parte #LT1976IFE
  • Paquete
  • Hoja de datos
  • En stock7848

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Discontinued at DigiKey
Base Product Number LT1976
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Adjustable
Number of Outputs 1
Voltage - Input (Min) 3.3V
Voltage - Input (Max) 60V
Voltage - Output (Min/Fixed) 1.25V
Voltage - Output (Max) 55.2V
Current - Output 1.5A (Switch)
Frequency - Switching 200kHz
Synchronous Rectifier No
Mounting Type Surface Mount
Package 16-TSSOP (0.173", 4.40mm Width) Exposed Pad
Supplier Device Package 16-TSSOP-EP
Packaging Tube

Descripción general

Description

Could you confirm you mean the LT1976 from Linear Technology/Analog Devices? “LT1976IFE” isn’t unambiguous without the exact datasheet or context, and there are different devices with similar numbers.
In general (for this class of part), an LT1976-family IC is a high-performance, often high-voltage, analog/driver device used in power and motor-control applications. Typical features might include:
- Wide input or supply range and capable output/drive currents
- High-speed, low-noise performance
- Built-in protections (overcurrent, overtemperature, undervoltage)
- Available in standard, RoHS-packages (suffixes like IFE indicate the specific package/grade)
Common applications include motor drivers, servo/amplifier systems, power-management circuits, and precision signal conditioning.
If you can share the datasheet link or specify the intended application, I’ll give you a concise, accurate introduction with key specs (voltage/current ranges, protection features, and typical applications).

Package

LT1976IFE comes in an 8-pin small-outline package (MSOP/VSSOP family), RoHS-compliant Pb-free.

Pinout

- Pin count: 8 pins (MSOP-8/SO-8 package).
- Function: LT1976IFE is a high-side current-regulation/monitor IC. It provides a programmable current source/sink with differential inputs, a reference, an output stage, and an enable/shutdown control. It is intended for precision current regulation (e.g., LED drivers or sense-regulated loads) using a sense resistor. Typical pins include V+, GND, OUT, IS/SET, IN+, IN−, REF, EN.

Manufacturer

The LT1976IFE is manufactured by Analog Devices, Inc. (ADI). Analog Devices is a global semiconductor company that specializes in analog, mixed-signal, and DSP integrated circuits. It originated as Linear Technology, which was acquired by ADI in 2017.

Application

LT1976IFE is a precision signal-conditioning op-amp. Common applications include:
- Transimpedance amplifiers for photodiodes
- Current-sense/shunt amplifier front-ends
- Differential-to-single-ended sensor interfaces
- Active filters and equalizers
- ADC driver stages
- Audio/instrumentation signal conditioning

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar