LP2951CM-3.3

Las imágenes son solo para referencia

LP2951CM-3.3

IC REG LIN POS ADJ 100MA 8SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tube,Tube
ProductStatus Not For New Designs
OutputConfiguration Positive
OutputType Adjustable (Fixed)
NumberofRegulators 1
Voltage-Input(Max) 30V
Voltage-Output(Min/Fixed) 1.235V (3.3V)
Voltage-Output(Max) 29V
VoltageDropout(Max) 0.6V @ 100mA
Current-Output 100mA
Current-Quiescent(Iq) 120 µA
Current-Supply(Max) 14 mA
ControlFeatures Enable
ProtectionFeatures Over Current, Over Temperature, Short Circuit
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Descripción general

Description

The LP2951CM-3.3 is a fixed 3.3V low-dropout regulator (LDO) from the LP2951 family. It provides a regulated 3.3V output from a higher single-supply input with very low quiescent current, making it suitable for battery-powered or micropower electronics.
Key points:
- Fixed output: 3.3V
- Very low quiescent current (micropower operation)
- Output current typically up to ~100 mA
- Low dropout (several hundred millivolts depending on load)
- Protection: short-circuit protection and thermal shutdown
- Input/output capacitors recommended for stability (per datasheet)
Pinout (three pins): Input, Ground, Output (package variant CM). The CM suffix refers to the specific package variant.
Applications:
- Battery-powered microcontroller/embedded projects
- Sensor and portable electronics
- Any single-supply system needing a stable 3.3V rail
Note: For exact electrical specs, recommended capacitor values, and package details, consult the LP2951CM-3.3 datasheet.

Package

TO-92 molded plastic, 3-pin through-hole package.

Pinout

- Pin count: 3 pins
- Function: Fixed 3.3 V low-dropout positive voltage regulator. Pins are Vin (input), GND (ground), and Vout (regulated 3.3 V output). Includes protection features (current limit and thermal shutdown) per the LP2951 family.

Manufacturer

Manufacturer: Texas Instruments (TI). TI is a multinational American semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits.

Application

LP2951CM-3.3 is a fixed 3.3V low-dropout regulator. Applications: power supply for 3.3V digital/mixed-signal logic in battery-powered/portable gear; microcontrollers, DSPs, memories, and ASICs; sensors, RF/transceiver modules; embedded system rails; pre-regulation for analog front-ends; low-quiescent-current rail in portable instrumentation and audio/video gear.

Equivalent

Equivalent 3.3V fixed LDOs you can consider (cross-references; verify pinout and specs):
- LM1117-3.3
- AMS1117-3.3
- LD1117-3.3
- NCP1117-3.3
- TLV1117-3.3
- MCP1700-3.3
- MCP1825S-3.3
- LP2985-3.3
Note: pinouts and quiescent current vary; check datasheets for interchangeability and packaging.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar