LMR23630QDRRRQ1

Las imágenes son solo para referencia

LMR23630QDRRRQ1

IC REG BUCK ADJUSTABLE 3A 12SON

  • Fabricante
  • Mfr. Parte #LMR23630QDRRRQ1
  • Paquete WFDFN-12
  • Hoja de datos
  • En stock3828

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR)
Series Automotive, AEC-Q100, SIMPLE SWITCHER®
ProductStatus Active
Function Step-Down
OutputConfiguration Positive
Topology Buck
OutputType Adjustable
NumberofOutputs 1
Voltage-Input(Min) 4V
Voltage-Input(Max) 36V
Voltage-Output(Min/Fixed) 1V
Voltage-Output(Max) 28V
Current-Output 3A
Frequency-Switching 150kHz ~ 2.425MHz
SynchronousRectifier Yes
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount, Wettable Flank
Package/Case 12-WFDFN Exposed Pad

Descripción general

Description

Introduction (concise):
- LMR23630QDRRRQ1 is TI’s LMR family 3-A synchronous buck DC-DC regulator (Simple Switcher), intended to convert a higher input voltage to a stable lower output.
-Wide input range and efficiency: typically supports up to around 36 V input with adjustable output via an external resistor network; designed for automotive, industrial, and other power rails.
-Top features: integrated high- and low-side MOSFETs, enable/shutdown, overcurrent/overload protection, over-temperature protection, undervoltage lockout, and soft-start. It is optimized for good efficiency,including light-load operation.
- Package note: the “QDRRRQ1” suffix denotes the specific TI package/reel/ RoHS options (i.e., a particular packaging variant of LMR23630).
- Typical use: powering CPUs/SoCs, FPGA cores, and other 3-A class loads from 6–36 V automotive or industrial systems.
- Resources: TI product page, datasheet, and evaluation boards provide pinout, electrical specs, and application guidance.

Features

Key features of LMR23630QDRRRQ1:
- 3-A step-down DC-DC converter with integrated high-side MOSFET
- Wide input range: 4.5 V to 36 V
- Output voltage adjustable via external feedback (0.8 V reference); supports fixed options
- Switching frequency ~2.25 MHz
- Current-mode control with cycle-by-cycle current limiting
- High efficiency and compact solution
- Enable/shutdown pin; soft-start; undervoltage lockout
- Protections: overcurrent, thermal shutdown, short-circuit protection
- Small QFN package with exposed pad (RoHS compliant)

Package

LMR23630QDRRRQ1 uses TI’s DRRR package: a VQFN-16 (4×4 mm) leadless package (automotive Q1).

Pinout

- Pin count: 16 pins in a QFN-16 package (with an exposed pad).
- Function: LMR23630QDRRRQ1 is a high-efficiency 3-A step-down (buck) regulator. It accepts a relatively high input (up to about 42 V) and outputs a programmable lower voltage. It includes an internal high-side switch and requires external components (inductor and catch diode or synchronous rectifier). Key pins typically include VIN, EN/UVLO, LX (switch node), FB (feedback), COMP (external compensation), BST/BOOT (bootstrap for gate drive), GND/PGND, IS/ILIM (current limit sense), and an exposed pad for thermal grounding.

Manufacturer

Manufacturer: Texas Instruments (TI).
What kind of company: TI is an American multinational semiconductor company that designs and manufactures analog and embedded processing chips, power-management ICs (including buck regulators like the LMR23630), microcontrollers, and related development tools and reference designs for industrial, automotive, consumer and communications markets. Headquarters: Dallas, Texas; publicly traded.

Application

- Automotive-grade power conversion: ECUs, infotainment, ADAS, body electronics (9–42 V input, high-current 30 A outputs)
- Industrial and robotics: motor drives, PLCs, automation controllers, high‑current DC‑DC rails
- Networking/telecom: high‑current VRMs for switches, routers, telecom equipment
- General embedded power: high‑current DC‑DC conversion to 3.3 V/5 V rails in demanding systems

Equivalent

Do you need exact drop-in/pin-compatible replacements or just functionally equivalent buck regulators? I can list specific alternatives once you confirm.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar