LM2903BQDDFRQ1

Las imágenes son solo para referencia

LM2903BQDDFRQ1

AUTOMOTIVE QUALIFIED DUAL DIFFER

  • Fabricante
  • Mfr. Parte #LM2903BQDDFRQ1
  • Paquete SOT-23-8
  • Hoja de datos
  • En stock6472

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100
ProductStatus Active
Type Differential
NumberofElements 2
OutputType CMOS, MOS, Open-Collector, TTL
Voltage-SupplySingle/Dual(±) 2V ~ 36V
Voltage-InputOffset(Max) 2.5mV @ 5V
Current-InputBias(Max) 0.025µA @ 5V
Current-Output(Typ) 21mA @ 5V
Current-Quiescent(Max) 600µA
PropagationDelay(Max) 1µs (Typ)
OperatingTemperature -40°C ~ 125°C (TA)
Package/Case SOT-23-8
MountingType Surface Mount

Descripción general

Description

The LM2903BQDDFRQ1 is TI’s dual low-power voltage comparator (LM2903 family) in an 8‑pin package. It compares two input voltages and drives open-collector outputs.
Key points:
- Dual open-collector outputs; requires external pull-up resistors.
- Wide supply: 2 to 36 V (single-supply operation).
- Input common-mode includes ground; typically up to Vcc−1.5 V.
- Input offset voltage typically around 2 mV (max ~7 mV).
- Output can sink roughly up to ~16 mA; cannot source current.
- Package options include common 8‑pin variants (SOIC/DIP); the Q1 suffix denotes a specific packaging/trace option—check the datasheet for exact details.
Applications: zero-cross and level detectors, window detectors, comparator-based switches, battery-powered sensing, and general threshold detection.
Design notes: use a pull-up resistor on each output, beware of noise (add hysteresis if needed), and ensure inputs stay within the common-mode range. For exact figures and packaging, consult the LM2903BQDDFRQ1 datasheet.

Features

Here are the typical features of the LM2903BQDDFRQ1 (dual comparator in an 8-pin package):
- Dual independent voltage comparators in one package
- Open-collector outputs (requires external pull-up resistors; outputs can be wired-AND)
- Input common-mode range includes ground
- Wide supply voltage range: 2 V to 36 V (single-supply operation)
- Low input bias currents and high input impedance
- Output capable of sinking current with low-side pull-up
- Suitable for a broad operating temperature range (industrial-grade variants available)
- Fast response with short propagation delays (depends on Vcc and load)
- Available in multiple small packages (e.g., 8-pin DIP/SOIC) with RoHS-compliant options
Note: Exact numbers (current, delay, temperature range) vary by variant and packaging; consult the datasheet for the specific “BQDDFRQ1” option for exact specifications.

Package

It’s in an 8-pin Small Outline IC (SOIC-8) package, RoHS-compliant (DDFR variant).

Pinout

Pin count: 8 pins.
Function: LM2903BQDDFRQ1 is a dual low-power comparator with open-collector outputs (two independent comparators). Outputs sink current and require pull-up resistors. Input common-mode includes ground; operating supply range is typically 2–36 V.

Manufacturer

Manufacturer: Texas Instruments Incorporated (TI).
Kind of company: A global American multinational semiconductor company that designs, manufactures, and sells integrated circuits, especially analog and mixed-signal devices.

Application

LM2903BQDDFRQ1 is a dual comparator with open-collector outputs. Common applications include:
- Battery/voltage monitoring (undervoltage/overvoltage)
- Power-supply regulation and reference circuits
- Window and level detectors
- Zero-crossing and AC line sensing
- Overcurrent/overload protection
- Motor/fan speed control and protection
- Thermostats and temperature-control interfaces
- Industrial/automotive sensing and threshold detection

Equivalent

Equivalent parts (dual, open-collector comparators; 2–36 V supply):
- LM393 (TI) – essentially the same
- ST TS393
- ON Semiconductor MC3302
- Fairchild KA393
- New Japan Radio NJM2903 (NJR)
Note: pinouts/package vary; verify datasheets for proper footprint and substitute suitability.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar