IXFP20N85X

Las imágenes son solo para referencia

IXFP20N85X

MOSFET N-CH 850V 20A TO220AB

  • Fabricante
  • Mfr. Parte #IXFP20N85X
  • Paquete
  • Hoja de datos
  • En stock6691

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier IXYS
Package Tube
Series HiPerFET™, Ultra X
ProductStatus Active
FETType N-Channel
Technology MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss) 850 V
Current-ContinuousDrain(Id)@25°C 20A (Tc)
DriveVoltage(MaxRdsOnMinRdsOn) 10V
RdsOn(Max)@IdVgs 330mOhm @ 500mA, 10V
Vgs(th)(Max)@Id 5.5V @ 2.5mA
GateCharge(Qg)(Max)@Vgs 63 nC @ 10 V
Vgs(Max) ±30V
InputCapacitance(Ciss)(Max)@Vds 1660 pF @ 25 V
PowerDissipation(Max) 540W (Tc)
OperatingTemperature -55°C ~ 150°C (TJ)
MountingType Through Hole
SupplierDevicePackage TO-220-3

Descripción general

Description

IXFP20N85X is an IXYS/Onsemi IXFP-series N-channel, enhancement-mode power MOSFET. It’s intended for high-voltage switching and power handling in compact circuits.
Key points:
- Vds and Id: about 85V maximum, ~20A continuous current.
- Rds(on): typically in the tens of milliohms range (varies with temperature and gate drive; datasheet gives exact values).
- Gate drive: best with ~10V gate-to-source for full conduction; Vgs(th) ~2–4V. Not guaranteed as a logic-level device.
- Package: 3-terminal device available in common power packages (e.g., TO-220AB, D2PAK, etc.).
- Applications: DC-DC converters, motor drivers, power switches in buck/boost/inverter stages, inline switching regulators.
- Design notes: heat sinking required; use proper gate drive, gate resistor, and protection (e.g., transient suppression and Vgs limits) per the datasheet.
For exact electrical figures (Rds(on) at your operating temperature, packaging options, and safe operating area), consult the official IXFP20N85X datasheet.

Features

IXFP20N85X is an N-channel enhancement-mode power MOSFET. Key features likely include:
- Vds: 85 V and Id: ~20 A rating
- Low on-resistance (Rds(on) specified in datasheet for reduced conduction losses)
- Fast switching performance (low gate charge for efficient driving)
- Robust electrical characteristics (avalanche-rated, wide SOA for protection against transients)
- Integrated body diode for freewheeling currents
- Trench/MOSFET technology for reliable operation
- Available in common power packages (e.g., TO-220AB, D2PAK)
- RoHS-compliant and lead-free
Applications: switching regulators, DC-DC converters, motor drives, and power management. For exact parameters (Rds(on), Qgs, gate threshold, packaging), please consult the official IXYS datasheet.

Package

The IXFP20N85X is a 20 A, 850 V N-channel MOSFET supplied in a TO-247 (three-pin) through-hole power package.

Pinout

Pin count: 3 electrical pins (plus a metal mounting tab). Pins (front view, leads down): Pin 1 = Gate, Pin 2 = Drain, Pin 3 = Source. The mounting tab is electrically connected to the Drain.
Function: IXFP20N85X is an N‑channel, enhancement‑mode power MOSFET (high‑voltage switch) rated for ~850 V VDS and designed for high‑voltage switching and power‑conversion applications (SMPS, inverters, motor drives).

Manufacturer

The IXFP20N85X is made by IXYS Corporation (now part of Littelfuse following acquisition). IXYS is a semiconductor company specializing in power semiconductors and power ICs—discrete MOSFETs/IGBTs, diodes, RF power devices and power modules for industrial, automotive, communications and consumer applications.

Application

IXFP20N85X is an N-channel power MOSFET (85 V). Typical application areas:
- Switching power supplies (offline PFC, DC-DC converters)
- Motor drives and PWM inverters (BLDC/servo)
- Solar inverters and battery charging/discharge circuits
- Uninterruptible power supplies (UPS) and telecom power equipment
- Industrial automation and automotive power electronics
Note: used wherever a high-voltage, high-efficiency switching device is needed.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar