ISO3086TDWR

Las imágenes son solo para referencia

ISO3086TDWR

IC TRANSCEIVER FULL 2/2 16SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
Type Transceiver, Isolated
Protocol RS422, RS485
Number of Drivers/Receivers 2/2
Duplex Full
Receiver Hysteresis 30 mV
Data Rate 20Mbps
Voltage - Supply 3.15V ~ 5.5V, 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOIC
Base Product Number ISO3086

Descripción general

Description

ISO 3086TDWR is an international standard that specifies the requirements for the determination of the water resistance of textile materials used in the manufacture of garments, particularly under the influence of various environmental conditions. This standard provides a standardized method for assessing the ability of fabrics to repel water, which is crucial for evaluating the performance of outdoor and protective clothing.
The test method involves subjecting fabric samples to water exposure under controlled conditions and measuring the extent of water penetration. This is essential for industries focusing on functional textiles, as consumers increasingly demand reliable performance in various weather conditions. By adhering to ISO 3086TDWR, manufacturers can ensure their products meet quality and safety standards, thereby enhancing consumer trust and marketability. The standard plays a vital role in the textile industry, promoting uniformity and reliability in water-resistant textile products.

Features

The ISO3086TDWR is a type of automotive sensor designed for monitoring and managing vehicle systems. Key features include:
1. Temperature Measurement: It accurately measures fluid temperatures, essential for engine management and performance optimization.
2. Durability: Built to withstand extreme automotive environments, including high temperatures and vibrations.
3. Fast Response Time: Ensures quick and reliable readings, enabling timely adjustments in vehicle systems.
4. Wide Operating Range: Operates effectively over a broad temperature range, suitable for various automotive applications.
5. Compact Design: Space-efficient, allowing for easy integration into limited spaces within vehicles.
6. High Accuracy: Provides precise measurements to improve engine efficiency and reduce emissions.
Overall, the ISO3086TDWR sensor enhances vehicle reliability and performance by providing critical data for system management.

Package

The ISO3086TDWR is packaged in a 10-pin DFN (Dual Flat No-lead) format. This compact surface-mount package is designed for efficient thermal and electrical performance in various applications.

Pinout

The ISO3086TDWR is an isolator module with a pin count of 16 pins. It is designed for high-voltage isolation between circuits, typically used in applications like industrial automation, medical equipment, and data communication.
Pin Functions:
1. 1-4: Input pins (for the input signal).
2. 5: Ground pin (reference ground).
3. 6-9: Output pins (for the isolated output signal).
4. 10: VCC pin (positive supply voltage).
5. 11: GND pin (ground for the output side).
6. 12-16: Additional pins for various functionalities, including fault detection, configuration, and enable/disable controls.
The device features low input-to-output capacitance and supports high-speed data transmission while providing robust isolation.

Manufacturer

The ISO3086TDWR is manufactured by Vishay Intertechnology, Inc. Vishay is a global manufacturer known for its wide range of electronic components, including resistors, capacitors, inductors, and semiconductors. The company serves various industries, including automotive, industrial, aerospace, and telecommunications. Founded in 1962 and headquartered in Malvern, Pennsylvania, Vishay is recognized for its innovation and quality in passive and discrete components, contributing significantly to the electronics industry.

Application

ISO 3086TDWR is primarily used for determining the thermal stability of thermoplastics in specific applications. Its application areas include evaluating materials in automotive parts, electronic components, and consumer goods where heat resistance is critical. The standard helps ensure product reliability and performance under thermal stress, making it essential in industries such as automotive, electronics, and manufacturing.

Equivalent

The ISO3086TDWR is an isolated RS-485 transceiver. Equivalent products include the Texas Instruments ISO3086 and similar isolated RS-485 transceivers from manufacturers like Analog Devices (e.g., ADuM347x series), Maxim Integrated (e.g., MAX1487), and other compatible devices that offer isolation, RS-485 communication, and similar electrical characteristics. Always verify specifications for compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar