IS25LP064D-JBLE

Las imágenes son solo para referencia

IS25LP064D-JBLE

IC FLASH 64MBIT SPI/QUAD 8SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Voltage - Supply 2.3V ~ 3.6V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Base Product Number IS25LP064
Technology FLASH - NOR (SLC)
Write Cycle Time - Word, Page 40µs, 800µs
Supplier Device Package 8-SOIC
Grade Automotive
Qualification AEC-Q100

Descripción general

Description

The IS25LP064D-JBLE is a 64Mb (8MB) serial NOR Flash memory chip manufactured by ISSI (Integrated Silicon Solutions, Inc.). It features aSPI (Serial Peripheral Interface) protocol for high-speed data transfer, making it suitable for various embedded applications. Key specifications include a wide operating voltage range (2.7V to 3.6V), fast read speeds of up to 104 MHz, and support for dual/quad SPI modes, allowing for increased data throughput.
The device offers multiple features such as a 4KB sector erase, 64KB block erase, and a full chip erase option, which provide flexibility in memory management. It is commonly used in applications like consumer electronics, automotive systems, and IoT devices due to its reliability and performance.
Additionally, the IS25LP064D-JBLE has a robust architecture that supports low power consumption, making it ideal for battery-operated devices. Its compact size and efficient design contribute to its popularity among developers seeking to enhance performance in embedded systems.

Features

The IS25LP064D-JBLE is a 64Mb (8MB) serial NOR Flash memory device from ISSI. Key features include:
1. Interface: Supports SPI (Serial Peripheral Interface) with dual and quad I/O modes for higher data rates.
2. Speed: Operates at clock frequencies up to 133 MHz (in dual/quad mode) and up to 66 MHz (in standard mode).
3. Memory Structure: Organized as 8,192 pages of 256 bytes each, with a 4KB sector and a 64KB block architecture.
4. Endurance: Offers high endurance with up to 100,000 program/erase cycles per sector.
5. Data Retention: Provides data retention of up to 20 years under typical conditions.
6. Power Consumption: Low power consumption with various modes, including deep power-down mode.
7. Package Options: Available in various packages, including 8-TSOP and 16-WSON for flexibility in design.
This device is ideal for applications in embedded systems, automotive, and consumer electronics requiring reliable non-volatile memory.

Package

The IS25LP064D-JBLE is packaged in an 8-pin WSON (Wireless Small Outline No-Lead) package. This compact, leadless design helps in reducing space on PCBs while providing reliable electrical performance for flash memory applications.

Pinout

The IS25LP064D-JBLE is a 64Mb (8MB) Serial NOR Flash memory device from ISSI. It features a total of 16 pins. The pin functions include:
1. CS#: Chip Select (active low)
2. SCK: Serial Clock
3. SI: Serial Input (Data In)
4. SO: Serial Output (Data Out)
5. WP#: Write Protect (active low)
6. HOLD#: Hold (active low)
7. VCC: Power Supply
8. GND: Ground
Additional pins include NC (No Connect) which do not have any specific function. The IS25LP064D supports standard Serial Peripheral Interface (SPI) communication, allowing for efficient data transfer and programming.

Manufacturer

The IS25LP064D-JBLE is manufactured by ISSI (Integrated Silicon Solution, Inc.), a company that specializes in designing and manufacturing high-performance memory products. ISSI primarily focuses on non-volatile memory solutions, including NOR flash memory, SRAM, and DRAM. Founded in 1988 and headquartered in San Jose, California, ISSI serves various markets such as automotive, industrial, consumer electronics, and telecommunications. The company's products are known for their reliability and performance, making them suitable for a wide range of applications in embedded systems and other electronic devices.

Application

The IS25LP064D-JBLE is a 64 Mb Serial NOR Flash memory, commonly used in applications such as consumer electronics, automotive systems, industrial control, Internet of Things (IoT) devices, and embedded systems. Its features enable firmware storage, data logging, and program execution, making it suitable for applications requiring non-volatile memory with fast access times and low power consumption.

Equivalent

The IS25LP064D-JBLE is a 64Mb Serial NOR Flash memory chip. Equivalent products include:
1. Winbond W25Q64FV
2. Micron MT25QL064
3. Spansion S25FL064L
4. Adesto AT25DF641
Ensure to verify specifications like voltage, speed, and pin configuration for compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar