INA199C1DCKR

Las imágenes son solo para referencia

INA199C1DCKR

IC OP AMP CURR SENSE SC70-6

  • Fabricante
  • Mfr. Parte #INA199C1DCKR
  • Paquete SC-70-6
  • Hoja de datos
  • En stock7318

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
Series Zero-Drift
ProductStatus Active
Function Current Sense
SensingMethod High/Low-Side
Accuracy ±1%
Voltage-Input -0.1V ~ 26V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 6-TSSOP, SC-88, SOT-363

Descripción general

Description

INA199C1DCKR is Texas Instruments’ single-channel high-side current-sense monitor in an 8-pin DCKR package. It measures the small voltage drop across a low-value shunt resistor placed in series with the load and converts that into a current at the Iout pin. An external resistor on Iout converts this current to a voltage that can be read by a microcontroller or ADC, enabling simple current monitoring. The device is designed for high-side sensing with a wide common‑mode input range, making it suitable for power-management, battery monitoring, load current sensing, and basic current‑limit protection circuits. The C1DCKR suffix denotes the specific package/temperature variant of the part. For exact electrical characteristics (sense range, Iout sensitivity, supply range, and any built‑in comparator/threshold features), refer to the TI datasheet for INA199C1DCKR.

Features

Here are the key features of the INA199C1DCKR:
- High-side current-sense monitor with current-output (Iout) proportional to shunt current
- Wide common-mode voltage range up to 26 V for high-side sensing
- Single-supply operation: 2.7 V to 5.5 V
- REF pin to offset the output; external resistor converts Iout to a usable voltage for ADCs
- Bidirectional current sensing (positive/negative depending on shunt polarity)
- Low input offset and high accuracy
- 8-pin package (DCKR), RoHS-compliant; suitable for industrial temp range
- Tape-and-reel variant available (DCKR) for automated assembly
These features enable accurate, low-cost current monitoring in high-side applications with minimal external components.

Package

An 8-pin VSSOP (Very-Small-Outline) package, DCKR variant.

Pinout

- Pin count: 8 pins (8-pin package, e.g., VSSOP-8 in DCKR variant).
- Function: High-side current-sense monitor/amp. It measures the voltage drop across a shunt resistor and provides an analog output voltage proportional to the sensed current (unidirectional current sensing).

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits (ICs), embedded processors, sensors, and related electronics components.

Application

- High-side current sensing for power rails (DC-DC converters, battery packs)
- Battery management and protection circuits
- Overcurrent protection and fault detection in automotive, industrial, and consumer electronics
- Motor control and drive current measurement
- Energy monitoring, power meters, solar inverters, UPS systems
- Load current profiling and monitoring in embedded systems

Equivalent

Exact pin-for-pin equivalents do not exist outside TI. Closest TI drop-ins: another INA199 variant (e.g., INA199A1) in a different package/revision. Other TI options with similar function: INA213/INA214 (different gain/config) and INA226 (digital I2C/SPI output). Across vendors, viable equivalents include Analog Devices AD8210/AD8211 and Linear Technology LTC6102, but pinouts and interfaces differ and PCB/layout changes are likely required. Check accuracy, gain, supply range, and packaging when selecting a substitute.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar