INA199B3DCKR

Las imágenes son solo para referencia

INA199B3DCKR

IC OPAMP CURR SENSE 14KHZ SC70-6

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
Series Zero-Drift
ProductStatus Active
Function Current Sense
SensingMethod High/Low-Side
Accuracy ±1.5%
Voltage-Input -0.1V ~ 26V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 6-TSSOP, SC-88, SOT-363

Descripción general

Description

INA199B3DCKR is Texas Instruments’ high-side current-sense monitor in an 8-pin VSSOP (DCK) package with Tape & Reel. It measures the voltage across a shunt resistor in the load’s high side and outputs an analog voltage proportional to the load current, serving as a front end for current sensing.
Key points:
- High-side sensing: common-mode up to about 40 V; VCC typically 2.7–5.5 V.
- Output proportional to shunt voltage with a fixed gain; REF pin allows zero-offset adjustment.
- No external ADC required for basic sensing; easy to feed to an ADC or comparator.
- Designed for automotive/industrial use with good precision and fast response.
- Package: 8-pin VSSOP (DCK), RoHS, Tape & Reel.
Typical usage: connect SH+ and SH− across a sense resistor, supply VCC to a logic rail, ground to GND, read VOUT (and adjust with REF if needed). For exact specs and ordering, consult the TI INA199 datasheet.

Features

Concise features of INA199B3DCKR:
- High-side current-sense monitor with current-output architecture
- Wide input/common-mode range: up to about 0–26 V (sensing across a shunt on the high side)
- Differential sense voltage across shunt: typically ±100 mV range
- Supply voltage (Vcc): 2.7 V to 5.5 V (single-supply operation)
- Output: Iout current output; external resistor converts to voltage; Vref pin available for offset/zero set
- Fast response with low offset and good accuracy over temperature
- Wide operating temperature: -40°C to +125°C
- 8-pin package (DCK/RoHS compliant, VSSOP family)
- Suitable for rugged automotive/industrial sensing with simple Iout-to-V conversion
Note: For exact electrical specs (gain, Iout range, input offset, protection features), please consult the TI datasheet for INA199B3DCKR.

Package

The INA199B3DCKR is in an 8-pin DCK package, i.e., VSSOP-8 (Very Small Outline Package) with tape-and-reel.

Pinout

- Pin count: 8 pins (8-pin package, DCKR).
- Function: High-side current-sense amplifier with a current-output (Iout). It senses the voltage across an external shunt resistor (IN+ to IN−) and outputs a current proportional to that differential voltage, with REF for offset. Used for bidirectional current monitoring in the power path.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits; headquartered in Dallas, Texas, and one of the world's largest semiconductor producers.

Application

Typical application areas for INA199B3DCKR:
- High-side current sensing for power supplies and DC-DC converters
- Battery-management and protection in portable and automotive systems
- Overcurrent protection and fault detection in motor drivers and power stages
- Load-current monitoring for regulation and efficiency
- Power-management ICs in automotive, telecom, servers, and consumer electronics

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar