ICM-20608D

Las imágenes son solo para referencia

ICM-20608D

MOTION TRACKING DEVICE

  • Fabricante
  • Mfr. Parte #ICM-20608D
  • Paquete
  • Hoja de datos
  • En stock11078

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Obsolete
Packaging Bulk

Descripción general

Description

ICM-20608D is a 6‑axis MEMS IMU from InvenSense (now part of TDK). It combines a 3‑axis accelerometer and a 3‑axis gyroscope with an on‑chip digital motion processor (DMP) for on‑board sensor fusion.
Key points:
- Interfaces: I2C or SPI
- Output: high data rates (up to ~1 kHz) with FIFO buffering
- Full-scale ranges: accelerometer typically ±2/4/8/16 g; gyroscope ±125/250/500/1000/2000 dps
- Power modes: configurable for low power
- Extras: temperature sensor, self‑test, interrupt outputs
- Applications: drones, robotics, wearables, motion sensing in devices
Note: exact pinout, register map, and DMP options vary by revision; consult the official datasheet and reference software for implementation details.

Features

Key features of the ICM-20608D:
- 6‑axis IMU: 3‑axis accelerometer + 3‑axis gyroscope.
- 16‑bit sensor data with programmable full scales: accelerometer ±2/4/8/16 g; gyroscope ±125/250/500/1000/2000 dps.
- High ODR with configurable digital filtering (up to 1 kHz data rate; configurable LPF).
- On‑chip temperature sensor for bias/temperature compensation.
- FIFO buffer and multiple interrupt options (data ready, FIFO watermark, etc.) for efficient data handling.
- Flexible serial interfaces: I2C and SPI (standard voltage compatibility).
- Low-power operation with sleep and accelerometer‑only modes.
- Self‑test and factory calibration for drift reduction.
- Small form factor (LGA package) and wide operating conditions: −40 °C to 85 °C.

Package

ICM-20608D is packaged in a 3×3 mm QFN (24-pin) package.

Pinout

ICM-20608D pin count: 28-pin LGA package.
Main pin functions (grouped):
- Power/grounds: AVDD, DVDD, VIO/VLOGIC (IO), multiple GND pins.
- Clock: XIN/XOUT (or EXT_CLK) for oscillator.
- Interface (digital I/O): I2C: SCL, SDA; SPI: SCK, MOSI, MISO, CS (NCS).
- Interrupt/status: INT, FSYNC, DRDY (data-ready).
- Address/select: AD0/AD1 (optional configurable I2C address).
- Other/pad pins: NC or reserved as per datasheet.
Note: exact pin mapping and available signals can vary by package variant; please consult the official datasheet for the precise pinout.

Manufacturer

- Manufacturer: InvenSense (a MEMS motion-sensor company; now a subsidiary of TDK Corporation).
- What kind of company: A global MEMS sensors designer/manufacturer specializing in inertial measurement units (accelerometers and gyroscopes) for smartphones, wearables, drones, automotive, and other electronics.

Application

ICM-20608D is a 6‑axis MEMS IMU (3‑axis accel + 3‑axis gyro). Key applications include:
- Mobile devices and wearables (motion sensing, gesture/UI)
- Gaming controllers and peripherals
- Drones and robotics (attitude estimation, stabilization)
- IoT and smart devices (gesture recognition, activity monitoring)
- Industrial monitoring (vibration, tilt, motion sensing)

Equivalent

Equivalent 6-axis IMUs (accelerometer + gyroscope, I2C/SPI):
- InvenSense ICM-20602
- MPU-6050 / MPU-6500 (InvenSense)
- Bosch BMI160
- STMicroelectronics LSM6DS3
Note: not pin-compatible; check interface, full-scale ranges, and power/performance specs to ensure suitability.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar