GD25Q40EEIGR

Las imágenes son solo para referencia

GD25Q40EEIGR

IC FLASH 4MBIT SPI/QUAD 8USON

  • Fabricante
  • Mfr. Parte #GD25Q40EEIGR
  • Paquete
  • Hoja de datos
  • En stock13003

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series GD25Q
Part Status Active
Base Product Number GD25Q40
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 4Mbit
Memory Organization 512K x 8
Memory Interface SPI - Quad I/O
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 70µs, 2ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-XFDFN Exposed Pad
Supplier Device Package 8-USON (3x2)
Packaging Cut Tape (CT), Tape & Reel (TR)
Access Time 7 ns

Descripción general

Description

GD25Q40EEIGR is a Gigadevice 4 Mbit serial flash memory (GD25Q40E family). It uses a standard SPI-compatible interface to store firmware and data for embedded systems. Key features:
- Capacity: 4 Mbit (512 KB)
- Package: 8-pin, RoHS-compliant (likely SOP8)
- Supply: typically 2.7–3.6 V
- Performance: fast read up to around 104 MHz; supports standard SPI read, page program (256 bytes), and sector/block erases (4 KB, 32 KB, 64 KB) plus chip erase
- Operations: write enable/disable, status register with write protection, power-down/deep power-down modes
- Compatibility: JEDEC-compatible IDs; optional dual/quad I/O modes on some variants
Uses: boot code storage, firmware updates, and data storage in microcontroller and embedded designs. For exact timing, voltage, temperature range, and packaging details, consult the official datasheet.

Features

Here are the typical features of GD25Q40EEIGR:
- 4 megabit (512 KB) serial flash memory
- SPI interface (SI, SO, SCK, CS) in an 8-pin package
- 3-byte addressing (no 4-byte address needed)
- Fast Read up to ~104 MHz
- Page program: up to 256 bytes
- Erase granularity: 4 KB sectors; 32 KB and 64 KB blocks; Chip erase option
- Power-down mode with fast wake-up
- Hardware protection: block/sector protection; WP# and HOLD# pins
- Endurance: typical around 100,000 P/E cycles; data retention ~years
- Supply voltage: 2.7–3.6 V
- Operating temp ranges available (industrial grade options, e.g., -40°C to 85°C)
- RoHS-compliant,GD25Q40E family in an 8-pin SOP (IGR) package
Notes:
- Specifics (e.g., exact voltage/ temp ranges, endurance) may vary by lot/grade; always refer to the latest datasheet for exact figures.

Package

The GD25Q40EEIGR comes in an 8-pin SOP (SOIC-8) package (lead-free/RoHS compliant).

Pinout

- Pin count: 8 pins (SOP-8).
- Function: 4 Mbit serial SPI flash memory (GD25Q40E family). Used to store code/data; supports standard SPI and Dual/Quad I/O modes. Pinout typically: CS, CLK, DI (MOSI), DO (MISO), WP#, HOLD#, VCC, GND. Common operations include Read, Fast Read, Page Program, Sector/Evac/Erase commands, and Chip Erase.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GD).
- What kind of company: A Chinese fabless semiconductor company that designs and markets flash memory (NOR/NAND) and microcontroller products, headquartered in Beijing.

Application

GD25Q40EEIGR is a 4-Mbit SPI serial flash. Common applications:
- External firmware/code storage for microcontrollers and SoCs
- Boot memory and firmware update/rollback
- Non-volatile storage for configuration data, calibration data, and logs (IoT/embedded)
- Storage for consumer electronics (routers, set-top boxes, printers, wearables)
- Non-volatile storage in automotive and industrial control units

Equivalent

Equivalents (4Mbit SPI NOR Flash, 2.7–3.6V, 8‑pin):
- Winbond W25Q40BV
- Macronix MX25L4006E
- ISSI IS25LP040D
- Cypress/S25FL004A
- Micron N25Q040A
- Adesto AT25SF040
Note: these are functionally similar drop-ins; verify exact pinout, timing, JEDEC IDs, and WP/BP/VPP pins for your board.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar