FSBB20CH120D

Las imágenes son solo para referencia

FSBB20CH120D

IGBT IPM 1.2KV 20A 27-PWRDIP MOD

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Series Motion SPM® 3
Part Status Not For New Designs
Base Product Number FSBB20
Type IGBT
Configuration 3 Phase Inverter
Current 20 A
Voltage - Isolation 2500Vrms
Mounting Type Through Hole
Package 27-PowerDIP Module (1.205", 30.60mm)
Packaging Tube
Voltage 1.2 kV

Descripción general

Description

FSBB20CH120D is a dual-channel high-voltage smart power module (half-bridge) from the FSBB family. It integrates two power devices (high- and low-side) and a gate-drive/control circuit in one package, with built-in protections.
Key points:
- Purpose: motor drives, inverters, and other high-power switching applications.
- Features: bootstrap high-side drive, UVLO, overcurrent/short-circuit protection, over-temperature protection, fault reporting.
- Typical use: PWM Inverters and motor control where a compact, protected half-bridge is beneficial.
- Ratings: designed for high blocking voltage (around 1200 V class) and beefy current capability; exact values, packaging, and thermal specs vary by revision.
Note: for precise electrical ratings, pinout, thermal characteristics, and packaging, consult the official datasheet for FSBB20CH120D.

Features

FSBB20CH120D is a STMicroelectronics FSBB high‑voltage IGBT module (dual IGBT with anti‑parallel diodes) for motor drives and inverters. Key features:
- Blocking voltage: 1200 V class
- Current: around 20 A continuous per device (per channel)
- Configuration: dual IGBT + anti‑parallel diodes in one compact module (half‑bridge)
- Fast switching IGBT technology with low conduction losses
- High dv/dt capability and rugged short‑circuit/avalanche performance
- Integrated diodes with fast recovery
- Thermally efficient package with baseplate for good heat sinking
- Electrical isolation between case and pins suitable for power applications
- Operating temperature range typically −40°C to +125°C
- Gate drive: compatible with standard IGBT gate voltages (approx. 10–15 V drive)
Common applications: motor drives, inverters, power supplies, renewable energy converters.
Note: For exact electrical specs (Vcesat, switching times, safe operating area, packaging details, isolation rating) refer to the current datasheet.

Package

Power module. It’s a dual IGBT/diode half-bridge package (FSBB family) containing two IGBTs and two diodes.

Pinout

Pin count: 6 pins.
Function: FSBB20CH120D is a dual IGBT module configured as a half-bridge (two IGBTs with antiparallel diodes). Pins provide Gate 1 (G1), Gate 2 (G2) and the corresponding Emitters (E1, E2) and Collectors (C1, C2) for each leg of the bridge. Used for inverter/motor-drive applications.

Manufacturer

The FSBB20CH120D is manufactured by Fuji Electric Co., Ltd. (Fuji Electric).
Fuji Electric is a Japanese multinational company that designs and produces electrical equipment, with a focus on power electronics, IGBT modules, drives, and industrial control systems for energy, manufacturing, and infrastructure applications.

Application

FSBB20CH120D is a high-voltage, high-current intelligent power module (IPM) with built-in drive (IGBTs/diodes). Applications include:
- Three-phase motor drives (BLDC/PMSM and AC induction)
- Servo drives and industrial automation
- Renewable-energy inverters (solar/wind)
- UPS and power-supply modules (DC–DC or AC–DC)
- General motor-control and power-conversion applications in industrial/hvac equipment

Equivalent

FSBB20CH120D is an ST Microelectronics part from the FSBB family (high‑voltage switch, around 1200 V, ~20 A). There isn’t a single universal cross-reference. To give equivalents, please specify: IGBT or MOSFET, package (e.g., D²PAK/TO‑220), and required ratings (Vce, Ic, switching frequency). With those, I’ll provide closest equivalents from Infineon, ON Semiconductor, Vishay, TI.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar