EMMC04G-MK27-C01C

Las imágenes son solo para referencia

EMMC04G-MK27-C01C

EMMC 5.0 (HS400) 153B 4GB

  • Fabricante
  • Mfr. Parte #EMMC04G-MK27-C01C
  • Paquete 153-FBGA
  • Hoja de datos
  • En stock2276

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Kingston
Package Tray
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat FLASH
MemorySize 4GB
MemoryInterface eMMC
Voltage-Supply 1.8V, 3.3V
OperatingTemperature -25°C ~ 85°C
MountingType Surface Mount
Package/Case 153-FBGA

Descripción general

Description

EMMC04G-MK27-C01C is a 4 GB embedded MultiMediaCard (eMMC) storage device designed for MK27-family MCUs. It combines memory and an eMMC controller in a single package and presents a standard MMC/SD interface to the host, so no external flash controller is needed. It is used as onboard non-volatile storage for firmware, OS images, data, and logs in embedded systems. It supports JEDEC eMMC 4.x features (data transfer modes, command set), optional boot partitions (Boot1/Boot2) and RPMB, depending on host support. Typical operation is at 3.3 V (with 1.8 V I/O in certain HS modes); speeds/timing follow the eMMC standard and the device revision. The C01C suffix denotes a specific production revision. For exact electrical specs, timing, wear-leveling, endurance, and partition handling, consult the vendor’s datasheet and reference design.

Features

I don’t have the exact datasheet for EMMC04G-MK27-C01C, but typical features for a 4 GB eMMC device of this code are:
- Capacity: 4 GB NAND flash
- Interface: eMMC 4.x with 8-bit data bus; up to 52 MHz
- Boot support: Boot partitions (Boot1/Boot2) and bootable from the device
- Security: RPMB (Replay Protected Memory Block) for secure storage
- Controller features: Built-in ECC, wear leveling, and bad-block management
- Partitioning: System partitions for Boot, RPMB, and User data
- Power and I/O: standard eMMC power rails and I/O levels (typically 3.3V I/O; some variants offer 1.8V support)
- Temperature/grade options: Industrial or automotive grade variants commonly available
- Package: Compact BGA form factor (vendor-specific pinout)
Note: Exact specifications (clock, read/write speeds, voltage rails, temperature range, and package) depend on the specific revision and supplier. Please share the datasheet or link for precise, official features.

Pinout

Pin count: 52 pins (BGA52).
Function: 4GB embedded MMC (eMMC) flash storage device with an integrated controller. It provides non-volatile storage for a host system and interfaces via the standard eMMC signals (CLK, CMD, D0–D7) along with power/GND (VCC, VCCQ, GND).

Application

Applications include:
- Embedded systems needing reliable non-volatile storage (OS/firmware, application data, file system)
- Data loggers and industrial controllers for local storage
- Consumer electronics (media players, handheld devices, digital signage)
- IoT gateways and edge devices requiring buffering and local storage
- Firmware updates and boot memory for MCUs
- Portable storage solutions in embedded designs where a 4 GB eMMC is suitable

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar