EL8176FWZ-T7

Las imágenes son solo para referencia

EL8176FWZ-T7

IC OPAMP GP 1 CIRCUIT SOT23-6

  • Fabricante
  • Mfr. Parte #EL8176FWZ-T7
  • Paquete SOT-23-6
  • Hoja de datos
  • En stock2519

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Renesas Electronics America Inc
Package Tape & Reel (TR)
ProductStatus Obsolete
AmplifierType General Purpose
NumberofCircuits 1
OutputType Rail-to-Rail
SlewRate 0.13V/µs
GainBandwidthProduct 400 kHz
-3dbBandwidth 1 MHz
Current-InputBias 500 pA
Voltage-InputOffset 80 µV
Current-Supply 55µA
Current-Output/Channel 31 mA
Voltage-SupplySpan(Min) 2.4 V
Voltage-SupplySpan(Max) 5.5 V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case SOT-23-6

Descripción general

Description

EL8176FWZ-T7 is a single-channel optocoupler (photocoupler) from Everlight, part of the EL817 family. It provides electrical isolation between input and output using an infrared LED (input) and a phototransistor (output).
Key points:
- Purpose: galvanic isolation for signal or feedback paths in power supplies, motor drivers, and microcontroller interfaces.
- Architecture: 1-channel, LED input driving a phototransistor output (NPN).
- Isolation: high-voltage barrier (typical ratings in the kilovolt RMS range, per datasheet).
- Packaging: 4-pin device in a tape-and-reel (T7) format for automated assembly; FWZ indicates package/lot code.
- Electrical behavior: current transfer ratio (CTR) depends on LED drive current and temperature; results vary with conditions (see datasheet for exact values and test conditions).
For exact electrical specs (IF, CTR, VCEO, parasitics) and recommended operating conditions, refer to the official EL8176FWZ-T7 datasheet.

Features

EL8176FWZ-T7 features:
- 1-channel optocoupler (LED input, phototransistor output)
- High input–output isolation (Viso up to 5 kV RMS minimum)
- Wide operating temperature: -55°C to +125°C
- RoHS compliant, Pb-free
- Package: FWZ SMD in Tape & Reel (T7) for automated assembly
- Output: NPN phototransistor suitable for logic/TTL interfaces
- Small footprint and good CTR for signal isolation
- Applications: microcontroller interfaces, power supplies, industrial control
Note: Refer to the datasheet for exact CTR, IF ratings, and timing specs.

Package

EL8176FWZ-T7 is an optocoupler in a 4‑pin DIP (DIP‑4) through‑hole package; the T7 suffix indicates tape‑and‑reel packaging.

Pinout

- Pin count: 4 pins
- Function: Optocoupler (photocoupler) with an LED input and NPN phototransistor output. Pin 1 = Anode, Pin 2 = Cathode (LED). Pin 3 = Emitter, Pin 4 = Collector (output transistor). Provides galvanic isolation between input and output.

Manufacturer

Manufacturer: Everlight Electronics Co., Ltd. (Everlight).
Kind of company: A Taiwan-based multinational that designs and manufactures optoelectronic components, including optocouplers, LEDs, infrared emitters/detectors, and related sensors, serving global markets.

Application

- Galvanic isolation between low-voltage control logic and high-voltage power circuits
- Feedback path in switch-mode power supplies (flyback/forward converters)
- Isolated interfaces for microcontrollers and digital signals (UART/SPI/I2C) in industrial, consumer, and automotive electronics
- Sensor/actuator isolation with EMI/noise immunity
- Safety-critical instrumentation and test equipment isolation

Equivalent

Equivalent parts (1-channel transistor-output optocouplers) include:
- PC817 (Sharp)
- LTV-817 (Lite-On)
- IL817 / IL817A (Vishay)
- EL817 / EL817 family (Everlight)
- 4N25 (older optocoupler family)
- HCPL-817 (Avago/Broadcom)
Note: pinouts, CTR and speed vary slightly; check datasheets for exact cross-reference and packaging.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar