CY7C64215-28PVXCT

Las imágenes son solo para referencia

CY7C64215-28PVXCT

IC CNTRLR USB FS 28SSOP

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Cypress Semiconductor Corp
Package Tape & Reel (TR),Cut Tape (CT)
Series enCoRe™ III
ProductStatus Active
Applications USB Microcontroller
CoreProcessor M8C
ProgramMemoryType FLASH (16kB)
ControllerSeries CY7C642xx
RAMSize 1K x 8
Interface I²C, USB
NumberofI/O 22
Voltage-Supply 3V ~ 5.25V
OperatingTemperature 0°C ~ 70°C
MountingType Surface Mount
Package/Case 28-SSOP (0.209, 5.30mm Width)

Descripción general

Description

CY7C64215-28PVXCT is a Cypress (Infineon) EZ-USB USB 2.0 peripheral controller from the FX2/FX2LP family. It combines a USB 2.0 transceiver, an on‑chip 8051‑class microcontroller, RAM, and multiple endpoints with a DMA engine, enabling you to implement a USB device without a separate MCU or host controller.
Key points:
- Used to build custom USB peripherals (HID, bulk transfer devices, USB bridges, data acquisition, etc.).
- Firmware runs on the on‑chip MCU via Cypress FX2/FX2LP APIs to manage USB enumeration, transfers, and endpoint handling.
- -28PVXCT denotes the package/industrial variants (roughly a 28‑pin package; package code and temperature range).
- Supports USB full/hi‑speed operation depending on design and host capabilities.
For precise electrical specs, memory, endpoint counts, GPIOs, and programming details, consult the CY7C64215 datasheet and Cypress/Infineon FX2LP development tools.

Features

CY7C64215-28PVXCT is a Cypress USB 2.0 slave-FIFO controller. Key features (typical for this device family):
- Hi-Speed USB 2.0 interface (480 Mbps) with full-speed compatibility
- Slave FIFO architecture: two independent FIFOs (A and B) for streaming data to/from a host MCU or FPGA
- Flexible data path: supports 8-bit or 16-bit data bus widths
- On-chip USB transceiver and protocol engine (no external PHY required)
- Configurable FIFO sizes, thresholds, and flow control; supports efficient, DMA-like transfers
- Interrupts and status signals for robust host–device handshaking
- EEPROM/configuration support for easy integration
- 28-pin PVXCT package option (compact, suitable for surface-mount designs)
Note: exact FIFO sizes, supported endpoint configurations, and voltage ranges can vary by variant; consult the official datasheet for precise specifications for your exact package/revision.

Package

It's a 28-pin Plastic Small-Outline package (SOIC). The -28P indicates 28 pins; PVX is Cypress’ package family code, and CT denotes cut-tape packaging.

Pinout

- Pin count: 28 pins (28-pin package)
- Function: Cypress EZ-USB USB 2.0 peripheral/controller (USB interface/bridge device with general-purpose I/O for a microcontroller system).

Manufacturer

- Manufacturer: Cypress Semiconductor Corporation (now part of Infineon Technologies AG).
- Company type: A semiconductor company that designs and manufactures integrated circuits (e.g., USB controllers, microcontrollers, memory, and analog/mixed-signal ICs) for various markets.

Application

CY7C64215-28PVXCT is a USB 2.0 high-speed hub controller. Typical applications include:
- External USB hubs (2/4 ports)
- Docking stations and USB PCIe/embedded add-on cards
- USB bridge/adapter solutions
- Portable storage enclosures
- USB peripherals (printers, scanners, cameras, keyboards/mice) in embedded, consumer electronics and industrial equipment.

Equivalent

Are you asking for a cross-reference to a pin‑compatible replacement? There isn’t a single exact non‑Cypress equivalent. For closest substitutions, use distributor cross‑reference tools (Digi‑Key/Mouser) or Infineon/Cypress support—provide the package, required features, and USB function.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar