CSD87333Q3D

Las imágenes son solo para referencia

CSD87333Q3D

MOSFET 2N-CH 30V 15A 8SON

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
Series NexFET™
ProductStatus Active
FETType 2 N-Channel (Dual) Asymmetrical
FETFeature Logic Level Gate, 5V Drive
DraintoSourceVoltage(Vdss) 30V
Current-ContinuousDrain(Id)@25°C 15A
RdsOn(Max)@IdVgs 14.3mOhm @ 4A, 8V
Vgs(th)(Max)@Id 1.2V @ 250µA
GateCharge(Qg)(Max)@Vgs 4.6nC @ 4.5V
InputCapacitance(Ciss)(Max)@Vds 662pF @ 15V
Power-Max 6W
OperatingTemperature 125°C (TJ)
MountingType Surface Mount
Package/Case 8-PowerTDFN

Descripción general

Description

CSD87333Q3D is TI’s NexFET dual N-channel power MOSFET in a 3x3 mm QFN (Q3D) package, automotive-qualified for harsh environments. It contains two N-channel FETs rated for roughly 30 V with low on-resistance (typical around tens of milliohms per FET) and fast switching, optimized for high-efficiency switching regulators.
Key points:
- Package: QFN-3x3 with exposed pad for heat dissipation
- Rating: about 30 V, dual N-channel devices
- Resistance: typically tens of mΩ per FET
- Features: low gate charge, suitable for synchronous buck/converter use
- Applications: automotive and industrial DC-DC converters, power management, half-bridge topologies
- Use: connect as a high-side/low-side pair per datasheet; ensure proper gate drive voltage and thermal management
For exact electrical specs, recommended operating conditions, and PCB footprint, consult the TI datasheet.

Features

Here are the typical features of TI CSD87333Q3D (Automotive-grade) at a glance:
- Automotive-grade, Q3D—AEC-Q100 compliant package
- Synchronous buck regulator with integrated high-side and low-side MOSFETs
- Wide input voltage range (suitable for 12/24V automotive rails)
- Adjustable output via external feedback (and fixed-output variants may exist)
- Soft-start and enable pin; power-good/reset signaling
- Current-mode control with PWM operation
- Protections: overcurrent/short-circuit protection, thermal shutdown, undervoltage lockout
- High efficiency благодаря synchronous topology
- Small 3×3 mm QFN package with exposed pad for thermal dissipation
Note: exact output voltage options, switching frequency, and pinout may vary by specific variant. For precise specs, consult the TI datasheet for CSD87333Q3D.

Package

CSD87333Q3D is in an 8‑pin QFN package (3.0 x 3.0 mm) with an exposed pad.

Pinout

Pin count: 16 pins in a 3.0 × 3.0 mm QFN package, plus an exposed pad (center pad).
Function: Dual N-channel MOSFET pair intended for power switching (high-side and low-side) in synchronous buck converters. Each FET has its own gate; drains are commonly tied to the package center pad (and/or dedicated drain pins per package variant), with sources connected to the respective nodes. For exact pinout and wiring, see the CSD87333Q3D datasheet.

Manufacturer

- Manufacturer: Texas Instruments (TI)
- What kind of company: American multinational semiconductor company that designs and manufactures analog, embedded processing, and other integrated circuits and components.

Application

Applications of CSD87333Q3D:
- Synchronous buck DC-DC converter power stage for VRMs in CPUs/GPUs/FPGAs/SoCs
- Automotive 12V/24V power networks as load-switch and PWM switching devices
- Motor control for BLDC/PMSM drives
- High-efficiency switching regulators in telecom and industrial equipment
- Point-of-load power management in battery-powered devices

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar