CAT25M01VI-GT3

Las imágenes son solo para referencia

CAT25M01VI-GT3

IC EEPROM 1MBIT SPI 10MHZ 8SOIC

  • Fabricante
  • Mfr. Parte #CAT25M01VI-GT3
  • Paquete SOP-8
  • Hoja de datos
  • En stock5694

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat EEPROM
Technology EEPROM
MemorySize 1Mb (128K x 8)
MemoryInterface SPI
ClockFrequency 10 MHz
WriteCycleTime-WordPage 5ms
Voltage-Supply 1.8V ~ 5.5V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Descripción general

Description

The CAT25M01VI-GT3 is a 1-megabit (128K x 8) serial EEPROM (Electrically Erasable Programmable Read-Only Memory) produced by ON Semiconductor. It utilizes the I2C interface for communication, allowing for simple and efficient data transfer between the memory and a microcontroller or other devices. This EEPROM operates with a voltage range of 2.7V to 5.5V, making it suitable for a variety of applications, including consumer electronics, automotive systems, and industrial controls.
Key features include fast write and erase operations, low power consumption, and the ability to retain data for up to 100 years. The CAT25M01VI-GT3 is particularly valued for its reliability and ease of integration into diverse electronic designs. It comes in a small SOIC-8 package, making it ideal for space-constrained applications. Overall, this component is a robust solution for applications requiring non-volatile memory storage.

Features

The CAT25M01VI-GT3 is a 1-Mbit (128K x 8) serial EEPROM from ON Semiconductor, featuring a CMOS technology design for low power consumption. It operates over a wide voltage range of 2.7V to 5.5V, making it suitable for various applications. Key features include:
- Interface: Compatible with the SPI (Serial Peripheral Interface) for fast data transfer.
- Speed: Supports a clock frequency of up to 20 MHz.
- Endurance: Offers a high write/erase cycle endurance of up to 1 million cycles.
- Data retention: Ensures data retention for up to 100 years.
- Temperature range: Operates reliably within -40°C to +85°C.
The device includes features like write protection, allowing secure data storage, and a compact 8-pin SOIC package for easy integration into various electronic designs. This makes the CAT25M01VI-GT3 ideal for applications in automotive, industrial, and consumer electronics where reliability and efficiency are critical.

Package

The CAT25M01VI-GT3 is packaged in a 8-pin SOIC (Small Outline Integrated Circuit) form factor. This package type is commonly used for surface mounting on printed circuit boards.

Pinout

The CAT25M01VI-GT3 is a 1 Megabit (128KB) Serial EEPROM from ON Semiconductor. It features a total of 8 pins. The pin configuration is as follows:
1. VCC: Power supply pin.
2. GND: Ground pin.
3. SCK (Serial Clock): Input pin for the clock signal, which synchronizes data transmission.
4. SI (Serial Input): Input pin for data being written to the memory.
5. SO (Serial Output): Output pin for data being read from the memory.
6. CS (Chip Select): Active low pin that enables the device for communication.
7. WP (Write Protect): Protects the memory against accidental writes when held high.
8. NC: Not connected (no internal connection).
This EEPROM uses a SPI (Serial Peripheral Interface) for communication, allowing for fast data transfer rates suitable for various applications in electronics.

Manufacturer

The manufacturer of the CAT25M01VI-GT3 is ON Semiconductor. ON Semiconductor is a global semiconductor company that designs and manufactures a wide range of electronic components and solutions. It specializes in power management, analog, and sensor technologies, serving various industries including automotive, industrial, communications, and consumer electronics. The company focuses on providing innovative semiconductor solutions that enhance energy efficiency and performance in multiple applications.

Application

The CAT25M01VI-GT3 is a 1-Mbit serial EEPROM used in various applications, including consumer electronics, automotive systems, industrial controls, and telecommunications. It is ideal for storing configuration data, calibration parameters, and firmware updates due to its non-volatile memory characteristics. Its low power consumption makes it suitable for battery-operated devices, while its SPI interface allows for fast data transfer in embedded systems.

Equivalent

The CAT25M01VI-GT3 is a 1Mb serial EEPROM. Equivalent products include the Microchip 25AA010A, Winbond W25X10, and STMicroelectronics M25P10. Ensure to check specifications such as voltage, interface, and packaging to confirm compatibility with your application.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar