AT25FF321A-SSHN-T

Las imágenes son solo para referencia

AT25FF321A-SSHN-T

IC FLASH 32MBIT SPI/QUAD 8SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Supplier Dialog Semiconductor GmbH
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NOR
MemorySize 32Mb (4M x 8)
MemoryInterface SPI - Quad I/O
ClockFrequency 104 MHz
Voltage-Supply 1.65V ~ 3.6V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Descripción general

Description

AT25FF321A-SSHN-T is a Microchip/Atmel 32‑Mbit serial SPI flash memory used to store firmware or data in embedded systems. Key points:
- Capacity: 32 Mbit (4 MBytes) of non-volatile flash.
- Interface: SPI-compatible serial interface in an 8-pin SSHN package.
- Organization: 256-byte pages; 4 KB sectors; 64 KB blocks; supports 4-byte addressing for full array.
- Features: fast read, page program, sector/block erase, write enable/disable, status register, deep power-down.
- Voltage: typically 2.7–3.6 V supply.
- Packaging/Temp: SSHN package with options for industrial temperature ranges (-40°C to +85°C or similar per datasheet).
- Applications: code storage, boot memory, data logging, LUTs.
- Why choose: small pin count, reliable non-volatile storage, widely supported by SPI drivers.
Note: Always consult the datasheet for exact timing, voltage, and package details.

Features

Here are the key features of AT25FF321A-SSHN-T (concise):
- Capacity: 32-Mbit (4 MBytes) serial Flash memory
- Interface: SPI-compatible serial interface (standard/read and fast read)
- Addressing: 3-byte addressing (sufficient for 4 MB)
- Organization: 256-byte page size; erase options include 4 KB sectors and 32 KB/64 KB blocks; bulk erase supported
- Programming: Page program with Write Enable; status/WIP and block-protect features
- Power modes: Active and Deep Power-Down for low current
- Voltage: 2.7 V to 3.6 V operation
- Temperature: Industrial range, typically -40°C to 85°C
- Endurance/Data retention: Typical P/E endurance in the 100k+ range; data retention ~years (typical 20+ years)
- Package: 8-pin package (SSHN variant)
- Security: Write protection options (software/ hardware block protection)
- Applications: Firmware/storage for embedded systems, boot ROM, data logging
Note: exact clock speed (MHz) and some package details may vary by lot; consult the datasheet for precise electrical specs.

Package

It uses an 8‑pin SOIC (Small Outline IC) package (package code SSHN).

Pinout

- Pin count: 8 pins (SPI serial flash package, e.g., SOIC-8)
- Function: Non-volatile serial SPI flash memory (Atmel AT25FF321A); stores data/code with standard SPI interface (CS, SCK, SI, SO) plus WP and HOLD pins, plus VCC and GND.

Manufacturer

- Manufacturer: Microchip Technology Inc. (owns the Atmel product line; AT25FF321A-SSHN-T is a Serial DataFlash memory part)
- What kind of company: A global semiconductor company that designs and manufactures microcontrollers, memory ICs, analog/linear devices, and other embedded components.

Application

AT25FF321A-SSHN-T is a 32‑Mbit SPI serial flash. Typical applications:
- External flash for firmware code and boot loaders
- Firmware update storage
- Program and data storage for embedded systems
- Configuration/calibration data and logs
- Caching/buffering in microcontrollers
Common in automotive, industrial controls, consumer electronics, networking gear, printers and set‑top boxes needing reliable nonvolatile storage with fast SPI access.

Equivalent

Common 32-Mbit SPI flash equivalents (8-pin, 3.3V) to AT25FF321A-SSHN-T:
- Winbond W25Q32FV / W25Q32JV
- Macronix MX25L3206E / MX25L3206F
- Gigadevice GD25Q32C
- ISSI IS25LP032D
- Micron N25Q032 / N25Q032A
- Puya P25Q32H
- Spansion S25FL327S / S25FL327P
Note: verify JEDEC ID, voltage, and timing from datasheets for exact pinout/compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria