AT24C08C-PUM

Las imágenes son solo para referencia

AT24C08C-PUM

IC EEPROM 8KBIT I2C 1MHZ 8DIP

  • Fabricante
  • Mfr. Parte #AT24C08C-PUM
  • Paquete PDIP-8
  • Hoja de datos
  • En stock2493

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tube
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat EEPROM
Technology EEPROM
MemorySize 8Kb (1K x 8)
MemoryInterface I²C
ClockFrequency 1 MHz
WriteCycleTime-WordPage 5ms
AccessTime 550 ns
Voltage-Supply 1.7V ~ 5.5V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Through Hole
Package/Case 8-DIP (0.300, 7.62mm)

Descripción general

Description

The AT24C08C-PUM is an 8-kilobit (1 Kbyte) EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by Microchip Technology. It uses I2C (Inter-Integrated Circuit) communication protocol for data transfer, which allows multiple devices to be connected on the same bus. The device operates with a supply voltage range of 1.7V to 5.5V, making it suitable for low-power applications.
The AT24C08C-PUM features a 1 MHz I2C bus speed and supports up to 1 million write cycles, ensuring durability for frequent data updates. It has a built-in Write Protect feature to prevent accidental overwrites. Data is organized in 256-byte pages, allowing for efficient read and write operations.
Common applications include data storage in consumer electronics, automotive systems, and industrial devices, where non-volatile memory is essential for storing configuration settings, calibration data, or other critical information. The package type is often a small 8-pin SOIC, making it ideal for space-constrained designs.

Features

The AT24C08C-PUM is an 8Kb (1K x 8) I2C EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. Key features include:
1. Memory Organization: 8Kbits divided into 1024 bytes, each byte can be individually accessed.
2. I2C Interface: Supports standard (100 kHz) and fast (400 kHz) modes.
3. Write Protection: Supports hardware and software write protection to secure stored data.
4. Byte and Page Write: Allows single-byte writes and multi-byte page writes (up to 16 bytes).
5. Endurance: Capable of enduring 1,000,000 write cycles per byte.
6. Data Retention: Retains data for at least 100 years under typical conditions.
7. Operating Voltage: Typically operates from 1.7V to 5.5V, making it suitable for low-power applications.
8. Package Options: Available in various packages, such as SOIC and TSSOP, for flexibility in design.
This EEPROM is ideal for applications requiring non-volatile storage, such as configuration data and calibration settings.

Package

The AT24C08C-PUM is packaged in a 8-pin UDFN (Ultra Thin Dual Flat No-lead) package. This compact, surface mount package is designed for space-constrained applications, providing a small footprint while offering reliability and ease of handling for electronic designs.

Pinout

The AT24C08C-PUM is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a pin count of 8. It operates using the I²C (Inter-Integrated Circuit) protocol for communication.
The pin functions are as follows:
1. Pin 1 (A0): Address pin for device selection.
2. Pin 2 (A1): Address pin for device selection.
3. Pin 3 (A2): Address pin for device selection.
4. Pin 4 (GND): Ground connection.
5. Pin 5 (SDA): Serial Data Line for data transfer.
6. Pin 6 (SCL): Serial Clock Line for timing control.
7. Pin 7 (WP): Write Protect pin. When connected to VCC, it prevents write operations.
8. Pin 8 (VCC): Power supply pin (typically 2.5V to 5.5V).
This chip provides 1 kilobit of memory organized in 8 pages of 256 bits each.

Manufacturer

The AT24C08C-PUM is manufactured by Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors. Founded in 1989 and headquartered in Chandler, Arizona, Microchip specializes in embedded control solutions, offering a wide range of products including microcontrollers, memory devices, and analog components. The AT24C08C-PUM is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip that provides non-volatile storage, commonly used in various electronic applications for data retention. Microchip serves diverse markets such as automotive, industrial, consumer, and IoT (Internet of Things), focusing on innovation and customer support in the semiconductor industry.

Application

The AT24C08C-PUM is an EEPROM (Electrically Erasable Programmable Read-Only Memory) used in various applications such as consumer electronics, automotive systems, industrial controls, and telecommunications. It is ideal for storing configuration data, calibration settings, and user preferences due to its non-volatile memory capability. Additionally, it is often employed in smart meters, RFID tags, and security systems to retain critical information even when power is lost.

Equivalent

The AT24C08C-PUM is an EEPROM chip with 1K x 8 bits capacity. Equivalent products include:
1. Microchip 24LC08B
2. STMicroelectronics M24C08
3. NXP (Philips) 93C66
4. Winbond W25X10CL
5. ON Semiconductor CAT24C08
Always check specifications for pin compatibility and performance characteristics.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria

Similar