AT24C08

The AT24C08 is a 1 Kbit (128 x 8-bit) EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by Microchip Technology. It utilizes the I²C (Inter-Integrated Circuit) interface for communication, allowing multiple devices to be connected on the same bus. The AT24C08 operates at supply voltages between 1.8V and 5.5V, making it suitable for a variety of low-power applications.
It features a fast access time of up to 1 ms, enabling quick data retrieval. The device can be organized in several configurations, including a byte or page write mode, with a maximum page size of 16 bytes. This allows for efficient data writing with fewer write cycles.
Additionally, the AT24C08 is designed to endure a minimum of 1 million write/erase cycles and has a data retention period of up to 100 years, ensuring long-term reliability. Common applications include storing configuration data, calibration parameters, and other non-volatile information in consumer electronics, automotive, and industrial systems.

The AT24C08 is an 8Kb (1024 x 8-bit) I2C EEPROM (Electrically Erasable Programmable Read-Only Memory) designed for data storage solutions. Key features include:
1. I2C Interface: Supports standard and fast modes (up to 400 kHz), facilitating easy integration with microcontrollers.
2. Memory Organization: Organized as 1024 bytes, allowing efficient data storage and retrieval.
3. Write Protection: Provides an optional write-protect pin to secure data from unintended writes.
4. Endurance and Retention: Offers a write endurance of up to 1 million cycles and data retention of 100 years.
5. Low Power Consumption: Operates with a supply voltage of 1.8V to 5.5V, making it suitable for battery-powered applications.
6. Byte and Page Write Modes: Supports both byte-level and page-level writing (up to 16 bytes at once).
7. Self-timed Write Cycle: Ensures data is written without requiring additional timing control.
These features make the AT24C08 ideal for applications in consumer electronics, automotive, and industrial sectors requiring reliable non-volatile memory solutions.

The AT24C08 is commonly available in an 8-pin DIP (Dual In-line Package) and a 5x6 mm TDFN (Thin Dual Flat No-lead) package. It is a serial EEPROM with I2C interface, used for data storage in various electronic applications.

The AT24C08 is an 8 Kbit I2C-compatible EEPROM (Electrically Erasable Programmable Read-Only Memory) with a 14-pin configuration. The pin count and functions are as follows:
1. Pin 1: A0 - Address input for device selection.
2. Pin 2: A1 - Address input for device selection.
3. Pin 3: A2 - Address input for device selection.
4. Pin 4: GND - Ground connection.
5. Pin 5: SDA - Serial Data Line (bi-directional data line).
6. Pin 6: SCL - Serial Clock Line (clock input for data transfer).
7. Pin 7: WP - Write Protect (active low).
8. Pin 8: NC - No Connect.
9. Pin 9: NC - No Connect.
10. Pin 10: VCC - Supply Voltage (typically 2.7V to 5.5V).
11. Pin 11: NC - No Connect.
12. Pin 12: NC - No Connect.
13. Pin 13: NC - No Connect.
14. Pin 14: NC - No Connect.
The device supports multiple I2C addresses by allowing the connection of up to 8 devices on a single bus using the A0, A1, and A2 pins.

The AT24C08 is manufactured by Microchip Technology Inc., a leading provider of microcontroller, memory, and analog semiconductors. Founded in 1989, Microchip specializes in developing integrated circuits and microcontrollers for a wide range of applications, including automotive, industrial, consumer electronics, and the Internet of Things (IoT). The AT24C08 is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device with a storage capacity of 1 kilobit (128 bytes) and is commonly used for data storage in various electronic systems. Microchip is known for its focus on innovation and reliability, serving both large corporations and small businesses in the electronics industry.

The AT24C08 is an 8Kbit EEPROM used in various applications including data storage for microcontrollers, configuration settings in consumer electronics, calibration data retention in sensors, logging applications in automotive systems, and inventory management in RFID systems. It is also utilized in industrial automation, medical devices, and smart home products for non-volatile data storage needs.

The AT24C08 is an EEPROM memory chip with 1K x 8 bits of storage. Equivalent products include:
1. 24C08 - A popular I2C EEPROM variant from various manufacturers (e.g., Microchip).
2. M24C08 - From STMicroelectronics.
3. 93C56 - A similar SPI EEPROM.
4. M24512 - A 512K EEPROM that can be used in applications requiring larger memory.
Always check electrical specifications and pin configurations for compatibility.